EXAIR’s Super Air Amplifier Removes Scrap Label Trim

air amp italian dressing.PNG(2)
Placement of the Super Air Amplifier tucked away in the machine

Recently I worked with our distributor in Peru that had a customer who was experiencing a nuisance issue one of their production lines. The company is a graphics company that serves many different food manufacturers in the Peruvian market. In this case, they were making a label for a salad dressing company. During the converting process, scrap trim is produced. This was falling to the ground, building up over time, and eventually would need to be cleaned up. To do so, they had to stop production and have an operator manually clean up the mess before restarting the machine.

IMG_20180123_120318
EXAIR’s Model 120021

Enter EXAIR’s Model 120021 Super Air Amplifier. The customer positioned the amplifier so that it would catch the scrap trim and convey it away from the machine. They positioned a waste receptacle about 6’ away and ducted the amplifier to carry the scrap to this bin. This eliminated their need to stop production and allowed them to run continuously. Before installing the Super Air Amplifier, they had to stop the machine approximately 4x or more per day for cleanup. At 10 minutes per, this was 40 minutes of lost production time per day! After proving the concept on this machine, the customer now plans to outfit another 3 with the same setup.

Because the material was so light and was only traveling a short distance, the Super Air Amplifier was a suitable solution. We’ve blogged in the past about similar applications where scrap trim is conveyed using a Line Vac. This is also a suitable solution, the Line Vac can be sized to accommodate your material and prevent excess scrap from accumulating and causing problems in your processes.

If you have a converting application that produces scrap trim, give us a call. We can help size an appropriate solution and make sure you’re not wasting valuable production time cleaning up the mess!

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@Exair.com
Twitter: @EXAIR_TD

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s