I recently had a chat conversation with a customer who was looking to cool the tooling on his CNC router, mill and lathe in his small machine shop. During the machining process, as the tooling would begin to heat up, it would warp the bit, causing irregularities in the finished product. In some cases the tooling was getting so hot, it would actually break, creating a safety concern.
He had reviewed some of our cooling products and was thinking of using our Cold Gun in the application but was concerned with the air demand. The Cold Gun consumes 15 SCFM @ 100 PSIG and provides a 50°F temperature drop (from supply temperature) with 1,000 Btu/hr. of cooling capacity. The problem was that his compressor only produces a little over 9 SCFM. I explained that the existing compressor would in fact be undersized as it doesn’t produce enough volume to keep up with the demand of the Cold Gun.
Due to the limited amount of compressed air available, our Mini Cooler System, Model # 3808, would be the better solution. The Mini Cooler also provides a 50°F temperature drop with a little less cooling power, 550 Btu/hr., but this system only requires 8 SCFM @ 100 PSIG, falling within the existing compressor’s output capacity. The Mini Cooler also includes a magnetic base as well as flexible tubing to direct the cold air to the desired location, making it easy to move from machine to machine.
If you are considering an EXAIR product for an application or have additional questions about performance, contact an application engineer for assistance in making the best selection.