Lower Operating Costs by Minimizing Compressed Air Leaks

Almost every industry uses compressed air in some capacity. It is often referred to as the “fourth utility” In an industrial setting, next to water, gas and electric. and in many cases, is the largest energy user in the plant. With an average cost of $ 0.25 per every 1000 Standard Cubic Feet used, compressed air can be expensive to produce so it is very important to use this utility as efficiently as possible. When evaluating the performance of a compressed air system, it’s important to look at the system as a whole.

When you operate point-of-use devices at a higher pressure than necessary to perform a certain job or function, you are creating “artificial demand”. This results in excess air volume being consumed, increasing the amount of energy being lost to waste. For example, plant personnel or operators increase the supply pressure in an effort to improve the end use devices performance. When there is a leak in the system, the line pressure will actually begin to drop and performance begins to deteriorate in other areas in the plant. This not only puts stress on the existing compressor but it also leads to the false idea that a larger or secondary compressor is needed.

Here’s a quick reference on how operating pressure can directly affect operating cost:

Our Model # 1101 Super Air Nozzle requires 14 SCFM @ 80 PSIG. Based on the average operating cost of $ 0.25 per 1000 SCF used, it would cost $ 0.21 per hour to operate this nozzle. (14 SCFM x $ 0.25 x 60 minutes / 1000 SCF = $ 0.21)

If you were able to use the same Model # 1101 Super Air Nozzle operating at only 40 PSIG, while still achieving the desired end result, the air demand would decrease to only 8.1 SCFM, reducing the hourly cost to $ 0.12.  (8.1 SCFM x $ 0.25 x 60 minute / 1000 SCF = $ 0.12)

Don’t waste your money

Leaks in a compressed air system can account for up to 30% of the total operational cost of the compressor, wasting thousands of dollars of electricity per year. Some of the more common places for a leak to occur would be at connection points such as valves, unions, couplings, fittings, etc.

In this table, you will see that a certain amount of air volume is lost through an orifice or opening. If you have several leaks throughout your facility, it isn’t gong to take long for the waste and high operating costs to quickly add up as well as potential increases in repair or maintenance costs for the existing compressor. The industry average shows that any leakage more than 10%, shows there are areas where operational improvements could be made in a compressed air system.

Stay tuned to our blog over the next few weeks as we will discuss how following a few simple steps can help optimize your current compressed air system, in many cases, reducing energy costs related to compressed air waste, leading to a more economical operation.

In the meantime, if you have any questions or would like to discuss a particular application or EXAIR product, give me a call at 800-903-9247.

Justin Nicholl
Application Engineer





Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s