A manufacturer of lubrication equipment had a messy problem to solve with a customized system they were designing, to apply grease to a drive chain.  They wanted to clean excess grease off the chain and deposit it into a reclaiming chamber, both to keep the area clean, and to prevent waste.  And because of the corrosive nature of the environment, it had to be stainless steel.  This was a “textbook” application for our Model 1126SS 1″ 316SS Flat Super Air Nozzle.

 

They also needed to lock it into position, once the exact angle of the air flow was determined, so they incorporated a Model 9052 1/8 NPT SS Swivel Fitting into their design.

Now the chain is clean, the grease is reclaimed, and the simplicity of the operation drew a lot of positive attention from the client.

I’ve written about this before, but it bears repeating…EXAIR Corporation’s plan for success is centered on being easy to do business with.  This was a situation where every facet of the project was impacted by our commitment to that goal:

*The customer and I determined the correct product to try in just a few minutes on the phone.

*The order shipped out, same day.

*The attention to detail that Engineering and Production put into the development of this product became evident in the ease of installation and operation.

From the moment you contact EXAIR, to the moment you achieve success in your application, it’s our job to make sure you get the most out of our products. If you have a job that you think one of our products might be a good fit for, give me a call.