By combining an Ionizing Bar with a Super Air Knife, the Super Ion Air Knife provides rapid static elimination AND blow off of any dust, chips, or debris that was being held to a surface by static electricity.  The laminar curtain of ionized air not only maximizes the rate of static removal, but is also ideal for stripping/sweeping away any debris which leaves a clean, static-free surface.  No more jamming, tearing, nuisance shocks to operators, dust attraction, or any of the many problems associated with static electricity.

The ionized air flow can be precisely regulated to whatever level it takes to get the job done.  At 100psig, the powerful, high velocity blast will dissipate 5,000 volts of static charge in 0.18 seconds!  If the material is fragile, or if that kind of air flow might disrupt the process, it’s not a big deal…even at 5psig supply pressure, that same 5,000 volts is dissipated in 0.40 seconds.  That’s how it works on the plastic roll above – with just a whisper of ionized air flow from a Super Ion Air Knife, they consistently reduce the resultant static charge to less than 400 volts…far below the threshold for the nuisance shocks they wanted to avoid.

They’re on the shelf in lengths from 3 inches to 9 feet long, and we can make custom lengths in three days after receipt of an order.  The 115/230VAC Power Supplies are available with 2 or 4 outlets, to energize from 1 to 4 EXAIR GEN4 Static Eliminators.

Versatile. Efficient. Effective. Quiet. Safe.  And, readily available.  If you’d like to discuss a static problem, give us a call.

Jordan Shouse
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS