Tag: ion air knives

RoHS, EXAIR, And You

Published on by Russ BowmanLeave a comment

The 20th century was an amazing time for technological advances. In just 70 years, the science & engineering communities went from believing that powered flight was impossible, to actually powering a flight that took three astronauts all the way to the Moon…and back. In the 50 years or so since then, the computers with the power required for space travel went from needing a whole room, to being able to fit on our desks, and eventually, our pockets.

All three of these: a state of the art computer from 1962 (left), the desktop computer I’m writing this blog on (middle), and a smart phone being used for its most popular function (right) all have about the same amount of computing power, believe it or not. (full disclosure: I believe it because I used my smart phone to look that up on the internet)

Along with these amazing advances in technology came exponential increases in the materials it takes to make devices like desktop (or laptop) computers and smart phones…and some of those materials don’t get along well at all with the environment, and by extension, those of us who live in said environment. This doesn’t normally matter as long as those materials are housed inside an operating computer or cell phone (or myriad other electronic devices), but it DOES become a concern when they’re disposed of. When stuff like that ends up in landfills, for instance, it has a bad habit of making its way into the water table…and that’s not good for anyone.

In 2002, the European Union (EU) started pursuing legislation to restrict the use of certain hazardous substances, to get out ahead of disposal issues by keeping them out of products from the very beginning. This led to the creation & implementation of the RoHS Directive. It’s been revised, amended, and updated over the years, because it turns out there are no viable substitutes for SOME of those substances in SOME situations. Among these exceptions:

  • Mercury is used extensively in a number of energy efficient CFL light bulbs and fluorescent tubes, so there are exemptions for that, and it works because there’s a whole industry devoted to the proper recycling of these products.
  • My personal favorite is the specific exclusion for lead in the manufacture of pipe organs. Seems that the lead based alloy that’s been used for centuries is critical to the tonal qualities of the sound that the pipes produce. Since disposal rates of these are negligible (the use of this alloy is one of the reasons they LAST for centuries), pipe organ pipes don’t have to be RoHS compliant.

Compliance with the RoHS Directive is so important to EXAIR, it’s part of our Sustainability Plan. All of our products that are subject to the Directive have certificates of compliance (available upon request) that document their compliance. Per the specifics of the Directive, these are comprised of certain products in our Optimization, Static Eliminators, and Cabinet Cooler System product lines:

  • Optimization:
    • EFC Electronic Flow Control Systems
    • Digital Flowmeters
    • Digital Sound Level Meters
    • Ultrasonic Leak Detectors
  • Static Eliminators:
    • Super Ion Air Knives
    • Standard Ion Air Knives
    • Ionizing Bars
    • Super Ion Air Wipes
    • Ion Air Cannons
    • Ion Air Guns
    • Ion Air Jets
    • Power Supplies
    • Intellistat Ion Air Guns
    • Intellistat Ion Air Nozzles
    • Static Meters
  • Cabinet Cooler System products:
    • Electronic Temperature Control Systems
    • Thermostats & Capacitors
    • Solenoid Valves

These are all of our products that are electrical or electronic in nature. Our broad line of engineered compressed air products are not subject to the Directive, as they have no electrical or electronic components. We DO make sure these comply with other regulatory directives, as applicable, such as:

  • Conflict Mineral Free: All compressed air products
  • CE: All products
  • UL: Static Eliminators and Cabinet Cooler Systems are UL Listed, HazLoc Cabinet Cooler Systems are UL Classified
  • ATEX: These are a brand new line (as of this writing) of Cabinet Cooler products

If you’d like to find out more about EXAIR’s commitment to compliance with any of these standards or directives, give me a call.

Russ Bowman, CCASS

Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Ionizing Points for Static Elimination Without Airflow

Published on by Russ BowmanLeave a comment

I almost wore three socks this morning: one on each foot, and one inside the sleeve of my shirt. I don’t know if it got in there through the agitation & spin of the washing machine, or the tumbling action in the dryer, but I know how it stayed there through the removal from the dryer, folding, and placing in my shirt drawer: static charge. This was evident from the ‘snap, crackle, and pop’ it made when I pulled it out.

Static charge is all around us. It’s mildly annoying in the clothes we pull from the dryer or the packing peanuts we can’t shake from our hands when unpacking from that new whatever-I-just-ordered from that website. It’s surprisingly uncomfortable when we touch the light switch after walking across a carpeted floor. And it’s terrifying when a lightning bolt hits so close that there’s no discernible delay for the thunder.

It’s also prevalent in many industrial processes: molding, trimming, wrapping (or unwrapping), bag & bottle filling, printing…just to name a few. Some materials are more prone to it than others, but all it takes is contact, and separation, of non-conductive surfaces to generate a static charge. The faster and/or more frequent the contact & separation, the higher the charge, and oftentimes there’s no better way to build up static electricity than sliding or rubbing those surfaces together.

EXAIR has a wide variety of Static Eliminator solutions: Super Ion Air Knives for webs or sheets up to 9 feet in width, Ion Air Cannons or Jets for more focused, conical ionized air blowing, Ion Air Guns for handheld operations, Super Ion Air Wipes for tube, pipe, extruded shapes, etc., and Intellistat Ion Air Guns & Nozzles for laboratory or clean room situations. Two of our Static Eliminator Products – Ionizing Bars & Ionizing Points – require no compressed air at all for operation, and one of those is the point (‘pun intended’ or ‘spoiler alert’ – you decide) of today’s blog.

The EXAIR Gen4 Ionizing Point is compact, versatile, and easy to install. It’s perfect for applications where even a light breeze worth of air flow would be disruptive or problematic. It’s also great for ionizing an existing air flow, like in a blower duct or air conveyance line. If limited space is a problem, it’s got the smallest footprint of just about any static eliminator on the market.

The EXAIR Model 8199 Gen4 Ionizing Point packs a LOT of static elimination in a small package.

They have impressive static dissipation performance as well, as seen in the table below. The only maintenance that’s required is a periodic cleaning of the emitter point (with the Power Supply OFF, using a soft bristled, dry brush). Should the emitter point become fouled, it can also be easily replaced.

If you’ve got problems with static charge, EXAIR has a comprehensive offering of solutions…give me a call to find out more.

Russ Bowman, CCASS

Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook

More And More Award Winning Products From EXAIR

Published on by Russ BowmanLeave a comment

As you might expect, a LOT of things have changed at EXAIR Corporation since 1983. Most of our current senior management had yet to graduate high school, and a fair number of current employees had yet to BE BORN. According to our computer system (another BIG change since 1983), our first ten customers were here in southwest Ohio (#11 was in Michigan), and now, we sell direct across the US & Canada, and our worldwide distributor network offers representation on six continents. One thing that hasn’t changed, though, is our founder’s vision of manufacturing quiet, safe, & efficient compressed air products for process improvement in just about any industry that uses compressed air. And THAT, dear reader, continues to gain high profile attention. The photo above shows the seven awards that our products have recently won, which were announced in 2021 or early 2022. Here’s a rundown:

Plant Engineering 2020 Product of the Year (Fluid Handling) GOLD AWARD:
1/2 NPT No Drip External Mix Air Atomizing Spray Nozzles

No Drip External Mix Atomizing Spray Nozzles

The 1/2 NPT models are the latest addition to our newest product line. The External Mix version offers the highest liquid flow rate, and largest pattern coverage. Among the applications where they’ve excelled so far are:

  • Snack food provider – applying flavoring to bulk snack materials.
  • Commercial bakery – spraying cooking oil onto pans used in a conveyor oven.
  • Sporting goods manufacturer – applying adhesive to the tops of skateboard decks to glue the grip tape on.

Plant Engineering 2020 Product of the Year (Material Handling Systems) GOLD AWARD:
2-1/2 NPT 303SS Threaded Line Vac™

EXAIR's Threaded Line Vac Family
EXAIR Threaded Line Vac + Your Pipe + Compressed Air = Instant Conveyor System

For bulk material conveyance, it really doesn’t get any simpler than EXAIR Air Operated Conveyors. Stainless Steel models are especially popular when the environment – or the product – is corrosive, or hot…they’re good to 400F (204C), and can even be modified with High Temperature components for exposure up to 900F (482C). The Threaded versions have been successfully used to:

  • Recycle sprinkles applied to wafers into a return hopper in a candy production facility.
  • Replacing an auger conveyor to allow for homogenous mixing of grains & supplements in feed stock at an agricultural mill.
  • Providing a low cost solution to convey product into a hopper at a grain processing plant.

Plant Engineering 2020 Product of the Year (Maintenance Tools & Equipment) SILVER AWARD
Occupational Health & Safety 2021 New Product of the Year (Industrial Hygiene-Dust Control) WINNER
Occupational Health & Safety 2021 New Product of the Year (Health & Safety/Cleanup) PLATINUM
EasySwitch® Wet-Dry Vac

Like our Spray Nozzles product line, our Industrial Housekeeping Products line has also grown considerably over the years. The Deep Hole Vac-u-Gun and Heavy Duty HEPA Vac were real game changers when they came along, and the EasySwitch® Wet-Dry Vac Systems are likewise making an impact. Switching from wet to dry operation is, as advertised in the name itself, INCREDIBLY easy. Among our satisfied customers are:

Occupational Health & Safety 2021 New Product of the Year (Lab Safety) WINNER
Intellistat® Ion Air Gun™

The newest innovation in a long line of EXAIR static elimination solutions, the Model 8500 Intellistat® Ion Air Gun is made for laboratories, clean rooms, medical & electronic applications, and carries an ISO 14644-1 Class 5 rating for clean room use. Because of their rapid decay rates and lightweight construction, they’re used in a diverse range of applications and areas, including:

  • A supplier of fiberoptic parts uses an Intellistat® to remove dust and static charge from product prior to packaging.
  • A medical device manufacturer has one in a Class 7 clean room for silicone parts cleanliness.
  • A nutritional supplements maker uses their Intellistat® to remove static charge & powder residue from the tops of plastic bags before sealing them. The excess/residual powder causes them not to seal correctly.

Machine Design 2021 Big Idea! (Electrical Components) BRONZE AWARD
Gen4® Static Eliminator Power Supply

All EXAIR Gen4 Static Eliminators use one of two Power Supplies – your choice of the 2-port Model 7960, or the 4-port Model 7961.

EXAIR Static Eliminators produce ionized air via a Corona discharge, which requires high voltage, low current electricity. The Gen4® Static Eliminator Products feature armored & shielded cables with an internal ground, for safety and reliability. The ground path is completed through the cable and the Power Supply port, eliminating the need for an external ground connection. Faults in external ground connections result in the majority of the problems with those devices, so the internal ground is a “Big Idea!” indeed. The Gen4® Static Eliminator Power Supplies are switchable for 115VAC or 230VAC voltages, and are offered in 2, or 4 outlet designs, which can power any 2, or 4 EXAIR Static Eliminator Products. Like most EXAIR Intelligent Compressed Air Products, they’re used for a wide range of applications, in a wide range of industries:

If you’d like to find out more about these, or any of our other engineered compressed air products (we’re pretty proud of them all), give me a call. I can talk about them all day long…and sometimes I do!

Russ Bowman, CCASS

Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Eliminate Static from Many Applications Using Super Ion Air Knives

Published on by Jordan T ShouseLeave a comment

By combining an Ionizing Bar with a Super Air Knife, the Super Ion Air Knife provides rapid static elimination AND blow off of any dust, chips, or debris that was being held to a surface by static electricity.  The laminar curtain of ionized air not only maximizes the rate of static removal, but is also ideal for stripping/sweeping away any debris which leaves a clean, static-free surface.  No more jamming, tearing, nuisance shocks to operators, dust attraction, or any of the many problems associated with static electricity.

The ionized air flow can be precisely regulated to whatever level it takes to get the job done.  At 100psig, the powerful, high velocity blast will dissipate 5,000 volts of static charge in 0.18 seconds!  If the material is fragile, or if that kind of air flow might disrupt the process, it’s not a big deal…even at 5psig supply pressure, that same 5,000 volts is dissipated in 0.40 seconds.  That’s how it works on the plastic roll above – with just a whisper of ionized air flow from a Super Ion Air Knife, they consistently reduce the resultant static charge to less than 400 volts…far below the threshold for the nuisance shocks they wanted to avoid.

Gen4 Super Ion Air Knife Performance

They’re on the shelf in lengths from 3 inches to 9 feet long, and we can make custom lengths in three days after receipt of an order.  The 115/230VAC Power Supplies are available with 2 or 4 outlets, to energize from 1 to 4 EXAIR GEN4 Static Eliminators.

Versatile. Efficient. Effective. Quiet. Safe.  And, readily available.  If you’d like to discuss a static problem, give us a call.

Jordan Shouse
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS