Tag: atex

Hot Off The Press (Release): EXAIR Catalog #35

Published on by Russ BowmanLeave a comment

If you’re a registered user on our website, you likely got word of this already through our August 15, 2023 Press Release. If not – or even if you did and want some more details – read on, and I’ll tell you all about it.

Like all of our previous catalogs, Catalog #35 provides specification, dimensional, and performance data on all of our stock products. Many of them include detailed descriptions of “textbook” applications for those products. You’ll also find:

  • Efficiency Lab (page 6): If you want a full performance report on a compressed air device you’re using right now, this is a free service we offer. Contact an Application Engineer and arrange to have it sent in. We’ll test it for compressed air consumption, force applied, and sound level, and send you a report on it. It’ll include, of course, the EXAIR engineered product(s) that we’ll recommend, along with performance data on them, as a comparison.
  • Our Six Steps (page 7): The first page of our Optimization section details the Six Steps To Optimizing Your Compressed Air System. It’s not necessary to follow them in order, and not all of them are applicable to every single compressed air system. But if you’re serious about reducing your compressed air costs, this is a comprehensive plan on how to do it for sure.
  • OSHA Maximum Allowable Noise Exposure table & typical Air Consumption values of common “homemade” blow offs (page 53): We put this here so you can turn the next few pages and see what a difference engineered products like EXAIR Super Air Nozzles can make.
  • Droplet Size data (page 98): Use this to determine the suitability of our Atomizing Spray Nozzles for liquid spraying applications.
  • Vortex Tube Specification and Performance tables (pages 201-202): If you know how much cold air flow you need, and at what temperature you need it, you can use these tables to determine which EXAIR Vortex Tube (or other Spot Cooling Product) to use.
  • Cabinet Cooler System Sizing Guide (page 220): Just fill in the blanks & send this in, and we’ll quickly & accurately calculate the heat load of your electrical/electronic enclosure, and specify the right Cabinet Cooler System for you.

Now, if you’ve ever had any of our previous catalogs, you might have noticed that those were already in there, and that’s all pretty great. What’s REALLY great about Catalog #35, though, is some of the new features:

  • Line Vac Conveyance Data (pages 176-177): While there’s WAY too many variables in bulk conveyance applications to accurately calculate conveyance rates. We’ve done some controlled, in-house testing with several different materials, several different Line Vacs, at several different lengths & heights, though, and we’re proud to publish that in the new catalog. This shouldn’t be considered a guarantee of performance, but if you’re wondering how much of a particular bulk material you can convey, this table will certainly get you in the right ballpark.
  • Best Practice for Using EXAIR Intelligent Compressed Air Products (pages 239-240): This information has always been in the Air Data files on our website, along with an ABUNDANCE of data that’ll help you get the most out of your compressed air system. Now, it’s at your fingers.

Of course, I’d be remiss if I wrote a whole blog on the new catalog without mentioning the new products:

  • Model 9207 Ultrasonic Leak Detector (pages 18-19): This serves the same function as the now-obsolete Model 9061, but with some handy upgrades like a LED display, a sleek new body, and high quality ear buds.
Use the Model 9207 Ultrasonic Leak Detector’s parabola to find the vicinity of the leak, and the tubular extension to identify its exact location.
  • 1/2 NPT HollowStream Cone Atomizing Nozzles (page 105): With five new distinct models at the high-flow end of our already comprehensive line of Liquid Atomizing Spray Nozzles, these provide up to 53 gallons per minute of liquid flow, and are capable of passing particulate up to 0.344″ in diameter.
The Hollow Cone spray pattern is ideal for cooling, cleaning, foam breaking, rinsing, and dust suppression. It also uses considerably less liquid than the FullStream models, when higher flow rate isn’t necessary.
EXAIR’s ATEX Cabinet Cooler Systems provide heat protection for electrical enclosures in potentially explosive atmospheres, like those found on offshore drilling platforms, petrochemical plants, mines, flour mills, etc.

Like our previous catalogs, Catalog 35 is now available for download (in product line sections due to file size) from the PDF Library at EXAIR.com. You can also request a copy to be mailed to you, or you can contact an Application Engineer to have individual product line sections (again, because of file size) email to you right away.

As always, if you’d like to talk about how to get the most out of your compressed air system, our team of Application Engineers are here Monday to Friday, 7am to 4pm Eastern, to help with that. Give me a call.

Russ Bowman, CCASS

Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook

NEMA, UL, IP, UL Classified and ATEX ratings

Published on by johnball2014Leave a comment

EXAIR manufactures Cabinet Coolers to keep your electrical components cool inside.  This will help to prevent any costly shutdowns or premature electrical failures due to overheating.  The EXAIR Cabinet Cooler System is a simple device that generates cold air with no moving parts, motors, condensers, or Freon.  They are maintenance-free with a long-life cycle, and installation is quick and easy.  But when mounting the system to your electrical panel, you want to make sure that the Cabinet Cooler meets or exceeds the integrity standard for that environment.  There are standards that categorize electrical panels to protect workers, shield the panel from the environment, and sustain the internal electrical components.   

Electrical panels come in all shapes, sizes, and colors and can be used in a variety of environments, including indoor, outdoor, and even hazardous locations.  Depending on the place and setting, you will need to determine the minimum requirements for the integrity of your electrical panel.  For example, you do not want to use an “indoor only” electrical enclosure for outside areas.  Also, you would not want a standard enclosure to be used in a hazardous area, as it can be very dangerous.  The major organizations that create these electrical standards are NEMA, UL, and IP.  In this blog, I will cover these organizations and how they use the rating system.  

NEMA, or National Electrical Manufacturer Association, and UL, or Underwriters Laboratory, are generally used in North America.  The difference between these two organizations is that the NEMA ratings are self-certifying, while the UL requires testing by qualified inspectors, independent of the manufacturer, for compliance.  They use numbers and, in some instances, letters to indicate the type of environment in which the enclosure can operate. EXAIR Cabinet Cooler Systems are UL listed, so they have been tested and verified.  Currently, there are over 20 different NEMA/UL classifications. 

IP, or Ingress Protection, is an international standard commonly used in Europe and established by the International Electrotechnical Commission, or IEC.  This organization also allows for self-certification.  They use two digits to define levels of integrity for electrical enclosures against intrusion from debris and liquid. The first digit ranges from 0 to 6, which specifies the protection rating from solids.  The second digit, which ranges from 0 to 9, specifies the protection rating for the ingress of water.  The higher the number, the better the protection.  The combination of these two numbers will determine the protection level of the enclosure against dust and water.  There is an equivalence between the NEMA ratings and the IP ratings, but it is up to the preference of the user to verify the protection requirement.   

EXAIR offers three main NEMA types for our Cabinet Cooler Systems, which are the most commonly found within most facilities.  We also offer two additional NEMA ratings that are designated strictly for hazardous locations: UL Classified and ATEX rated.   

From right to left: Small NEMA 12, Large NEMA 12, Large NEMA 4X

NEMA 12 (IP54) Cabinet Coolers are rated for dust and oil tight. NEMA 12 cabinet coolers are ideal for general industrial environments where no liquids or corrosives are present and are located inside the facility.  

NEMA 4 (IP66) Cabinet Coolers are rated for dust tight, oil tight, splash-resistant and indoor/outdoor service. These Cabinet Coolers incorporate a low-pressure relief valve to allow the internal hot air to escape as well as to close and seal when the cooler is not in operation.  This allows this Cabinet Cooler to maintain the integrity of a NEMA 4 enclosure.  

NEMA 4X (IP66) Cabinet Coolers offer the same protection as NEMA 4 but are constructed of stainless steel for food service and corrosive environments.  EXAIR offers both 303SS and 316SS materials.  

HazLoc Cabinet Coolers are designed for hazardous locations and are mounted to NEMA 7, 8, and 9 enclosures.  EXAIR catalogs these Cabinet Coolers as NEMA 4 (IP66) or NEMA 4X (IP66), as mentioned above.  But their registration for UL classified is for Class I, Class II, and Class III hazardous areas, both Div 1 and Div 2.  The reason that they do not match the NEMA rating of the hazardous panels is because they require an X-type or Z-type purge system.  In combination, they will not sacrifice the integrity of the hazardous electrical panels.   

ATEX Cabinet Coolers have similar attributes as HazLoc Cabinet Coolers except this type of registration is popularly used in Europe.  These area classifications fall under the EN/IEC 60079-2 international standard for explosive zones.  It covers three zones in two hazardous areas, gas/liquid and dust.  The ATEX Cabinet Coolers can be used in Zone 2 for gas/liquid and Zone 22 for dust.  Like the HazLoc Cabinet Coolers, to keep their classification, the ATEX Cabinet Coolers require a Zone 2/22 purge system.  The ATEX terminology is as follows:  

Gas – CE EX II 3 G Ex h IIC T3 Gc

Dust – CE EX II 3 D Ex h IIIC 200oC Dc  

EXAIR offers a variety of Cabinet Coolers in stock with different cooling capacities, materials of construction, and operational locations.  We also offer them in 316SS, high temperature versions, and non-hazardous purge.  We do have a Cabinet Cooler System Sizing Guide to help determine the best product for your application or a Cabinet Cooler System Calculator to do it yourself.  For any hazardous location, we do recommend contacting us for clarification.  If you have any questions, an Application Engineer at EXAIR can assist you.    

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

Video Blog: EXAIR’s NEW ATEX Cabinet Coolers are In Stock!

Published on by Tyler DanielLeave a comment

A new addition to the EXAIR line of Cabinet Coolers is the ATEX Compliant Cabinet Cooler. The ATEX NEMA 4 (IP 66) Cabinet Cooler Systems are engineered and approved for use on purged electrical enclosures located in ATEX Zones 2 and 22. The Zone 2 and 22 are for hazardous gases and dust, respectively. These are locations where an explosive atmosphere is not liable to occur during normal operation, or if it does, is only short-lived (such as in the case of foreseeable abnormal operation).

Take a look at the video below introducing these new coolers as well as an understanding of the important considerations for applications that require a cooler of this style:

If you have an application that could require the use of an ATEX Cabinet Cooler, complete a Cabinet Cooler Sizing Guide at the link here. We’ll be in contact to help you to determine the correct system for your panel’s conditions.

Tyler Daniel, CCASS

Application Engineer

E-mail: TylerDaniel@EXAIR.com

Twitter: @EXAIR_TD

What’s So Great About The New EXAIR Catalog #35?

Published on by Russ BowmanLeave a comment

This may seem biased, but my answer is, “EVERYTHING!” Now, that may SEEM biased, but consider the fact that, as an Application Engineer, I have a front row seat for the “Innovation Show” that is EXAIR. The attention to detail that gets paid to the design, testing, verification, and manufacturing of new products constantly reminds me that it’s a level of excellence that EXAIR’s founder, Roy Sweeney, instilled and promoted in our culture from when he started this business in 1983, until his passing in 2016. It’s a testament to his legacy that, not only does it continue; it shows no signs of slowing down. It’s that level of excellence that’s always made it easy for me to speak with confidence about the quality, performance, durability, and effectiveness of all of EXAIR’s engineered compressed air products.

Our Marketing folks proudly passed out copies of the new EXAIR Catalog #35 the other day, and I immediately started immersing myself in that pride as I thumbed through. I thought of 12 years (for me) worth of success stories in helping customers get the most out of their compressed air systems through the use of our products, and our expertise in not only those products’ implementation, but how they can best fit into those customers’ air systems, overall. I wasn’t too far in to my thumbing through, when the “new stuff” really started making an impression on me:

Ultrasonic Leak Detector: Model 9207 is the first new product you’ll see if you start at the beginning. It has the same functionality and tools (parabolic disc for finding out you have leaks in a particular area, and a tubular extension so you can track the leak to its exact location), and some nice upgrades: it’s powered by four AA batteries (instead of a 9V) and comes with a set of earbuds (which I personally prefer over the previous model’s earphones, which I always considered a compromise between headphone & earbuds, with the benefits of neither). It’s never been easier to find those costly leaks in your air system, and fix them.

1/2 NPT HollowStream Liquid Atomizing Spray Nozzles: We’ve had these in 1/4 and 3/8 NPT sizes for a while now, with the ability to spray up to 7.28 gallons per minute. The 1/2 NPT models almost double that capacity to a flow rate of 14 gallons per minute. These spray a ring of liquid, so their flow rates are lower than a comparably sized Full Stream Liquid Atomizing Spray Nozzle, which spray a full, filled-in circle.

Line Vac Conveyance Chart: Remember what I said above about the ability to speak confidently about our products? This new chart compiles decades of controlled in-house testing and details that some customers have shared with us on the performance of different Line Vac models with different materials they’ve been used to convey. While we can’t guarantee EXACT conveyance performance for any specific application, this is a VERY handy tool to get us “in the ballpark” and further increases our great ability to specify the right Air Operated Conveyor for your application.

ATEX Cabinet Cooler Systems: It was a pretty big deal when we introduced our HazLoc Cabinet Cooler Systems that are UL Classified for Class I Div 1, Class II Div 1, and Class III environments. And it WAS a big deal, in the United States & Canada. Now, we can offer the certification of hazardous location requirements, globally, for ATEX Zones 2 & 22. That’s ANOTHER big deal.

Speaking of big deals, come October, EXAIR will have been providing quiet, safe, and efficient compressed air products to industry for 40 years. Catalog 35 has all the products that we’ve been making since then, and everything we’ve added over the years. Click here to get one mailed out to you right away. If you’ve got questions about anything in our catalog, or how EXAIR can help you get the most out of your compressed air system, give me a call.

Russ Bowman, CCASS

Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook