Effectively and Efficiently Remove Chips and Debris from Blind Holes

I was recently contacted by an automotive parts manufacturer that was looking for a solution for cleaning out blind holes in a variety of machined parts. After discussing the application, we settled on a 1697SS-6-CS VariBlast Compact Safety Air Gun with Pico Nozzle, 6” Extension, and a Chip Shield. The small M5 nozzle at the tip of the gun allowed them to insert it inside of the hole and dislodge the hard-to-reach chips inside of the holes.

1697SS VariBlast Compact Safety Air Gun

This worked very well for removing the chips, but they were encountering an unexpected issue as these chips were now getting lodged in other areas of the part as they were ejected. They then had to visually inspect the entire part after each blowoff to ensure that everything was completely removed.

What they thought to be an ideal solution, ended up not being the best fit. They gave us a call back to inquire about an alternative solution. We offer another product, the Deep-Hole Vac-U-Gun, that is capable of both removing chips and debris from blind holes and also vacuuming it away simultaneously.

This addresses the problem of dislodged chips being caught elsewhere on the parts. Fortunately, EXAIR offers an unconditional 30-day guarantee for all stock products. They were able to return the previously purchased gun and apply the credit towards the purchase of the Deep Hole Vac-u-Gun system.

The Deep Hole Vac-u-Gun is a low-cost solution to quickly remove chips and contaminants from grooves, containers, and drilled holes. In applications where simply blowing the debris out of the hole isn’t suitable, simply position the Deep Hole Vac-u-Gun over the hole and press the trigger. A small blow tube (3) dislodges and lifts the chips while the large suction tube (5) vacuums them away. The operator is then protected from flying debris since the contaminants are then contained within the suction tube and directed into a filter bag or other container with the included vacuum hose.

Sometimes we don’t always get it right on the first try. But, with the ability to take advantage of the 30-day guarantee we’ll make sure to get the best product to you for your application. With same day shipments with orders received by 3:00 ET for stock products, EXAIR can get a solution out to you quickly!

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD

Deep Hole Vac-u-Gun – Blow Chips Loose and Vacuum Them Away in One Step!

Last week, we looked at the Vac-u-Gun, and you can take a look at that blog here.

This week I wanted to present the Deep Hole Vac-u-Gun, a special iteration of the Vac-u-Gun, designed to provide a solution to the troublesome process of cleaning cavities and drilled holes.

The Deep Hole Vac-u-Gun is a low cost solution to quickly remove chips and debris from grooves and drilled holes where blow gun could create potentially hazardous flying debris. The Deep Hole Vac-u-Gun is simply positioned over the hole, and the trigger squeezed and then a small blow tube delivers a a stream of air to dislodge and lift the chips while the large suction tube vacuum them away. The operator is protected form flying debris since all chips and debris is contained within the clear suction tube. The device is capable of cleaning holes up to 1-1/4″ (32mm) diameter and 18″ (457mm) deep!

How does the Deep Hole Vac-u-Gun work?

dhvghowani
How the Deep Hole Vac-u-Gun Works

 


Compressed air, normally 80-100 PSIG (5.5 – 6.9 bar), flows through the inlet (1) into an annular plenum chamber (2) when the trigger is pressed. A small amount of air is injected into the blow tube (3) to provide agitation and lift to the chips or debris. The larger airflow is injected into the the throat of the gun through directed nozzles (4). The jets of air create the vacuum at the intake (5) which draws the material in and accelerates it through the unit. The chips, debris or other particulates can then be exhausted into a filter bag or hose attached to the Deep Hole Vac-u-Gun System.


 

We have found many applications where the Deep Hole Vac-u-Gun is beneficial- including removing chips and debris in:

Holes in fixtures, drilled plastics, T-slots’groove cleaning , coolant evacuation from parts, woodworking, tapped holes, cavity evacuation, and many more!

There are many advantages to the Deep Hole Vac-u-Gun, and some are:

Low cost, no moving parts/maintenance free, durable die cast construction, eliminates shock hazard – no electricity, meets OSHA pressure requirements, safe operation – no flying chips, lightweight and portable, and quiet.

The Deep Hole Vac-u-Gun uses less compressed air than ordinary blow guns, and the amplified output flow is 12 times the air consumption rate.

Deep Hole Vac-u-Gun Specifications

Note that the Deep Hole Vac-u-Gun should not be operated without a filter bag or vacuum hose attached to the exhaust.

There are three (3) Deep Hole Vac-u-Gun System options-

Deep Hole Vac-u-Gun Systems

The Model 6094 is the Deep Hole Vac-u-Gun only.

The Model 6194 comes with a reusable bag and clamp for debris collection.

The Model 6394 comes with the reusable bag and a 10′ (3m) section of vacuum hose for transferring the debris to a collection point.

If you have questions about the Deep Hole Vac-u-Gun or any of the 16 different EXAIR Intelligent Compressed Air® Product lines, feel free to contact EXAIR and myself or any of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB