Of all the tools that I own, my cordless drill has to be just about my favorite. I’m remodeling a bathroom in my house right now, and last night I was setting the new toilet flange onto the new tile floor. I had to drill some holes for this through the new tile. I’d never done this before, and was definitely feeling some heartburn about it. Especially after finding out just how fragile and brittle ceramic tile is…I cracked two pieces, just trying to cut a hole for the heat & AC vent register. Luckily, that was BEFORE I mortared & grouted it in, so it wasn’t a big deal…they’re about a buck a piece, and I got five extra anyway.
THIS one, though, was fully installed, and, despite all the internet videos I found & watched on how to install a tile floor, I haven’t yet had the need to find one that shows me how to replace a broken tile. And I don’t really want to, so I went slowly and carefully with the drill, using the special glass & tile bit that I bought. On my first hole, when I got the bit through the tile itself, I changed to a different (smaller) bit to pilot the screw hole through the subfloor. Then, I put a Phillip’s head bit in to drive the screw. It occurred to me that I was performing these three related but separate tasks, with the same tool…I just thought that was very cool.
Over the course of the last couple of days, I’ve talked to three different callers, with three different Line Vac applications:
*One wants to use a Model 150200 2” Heavy Duty Line Vac to convey cement. They’re currently hauling the bags, by hand, up to a hopper, where they cut them open and dump them in.
*One needs to move small springs, one at a time, from a hopper to an automated assembly turret machine. The springs are 5/8″ in diameter, and they’ll be fed through a length of PVC pipe. Our Model 151100 1″ NPT Heavy Duty Threaded Line Vac will be easily installed in the pipe line using standard threaded fittings, and the springs will pass through the 0.75″ throat nicely.
*One has a auger-type chip conveyor that removes machining debris from a lathe, and it’s broken…again. They needed a Model 6066 3” Stainless Steel Line Vac, in a hurry, to use until they get their chip conveyor fixed. In fact, if it works, they may not fix the chip conveyor.
So, kind of like my cordless drill, our Line Vac Air Operated Conveyors have a variety of uses, right out of the box. If you have an application that you think a Line Vac may be able to solve, give me a call. By the way, if you order one before the end of October, 2014we’ll give you a FREE 2″ Flat Super Air Nozzle. Really.