Recently EXAIR worked on a project to cool down parts that were using Ultraviolet (UV) light to cure a surface coating. Ultraviolet curing is a photochemical process that uses UV light to cure/dry certain inks, coatings, and adhesives. Due to the fact that UV light produces a good amount of heat the product would heat up during the curing process and create issues for them down the line which slowed down production in order let them cool. The simple solution to this was the use of the vortex tube to blow on the product to cool it down during the process. By doing so they were able cool the product down to a suitable temperature for the process to speed up.
EXAIR’s Vortex Tubes are great for cooling down surfaces to temperatures below ambient thanks to the cold air stream that is produced from the vortex tube. Vortex tubes use a source of compressed air to create both a hot and cold stream of air simultaneously which allows the unit to be used for cooling but also heating applications. The amount of air flow coming out of either end of the Vortex Tube can be controlled; by doing so one can adjust the temperature of the air streams coming out.
Although the main application for the Vortex Tube is to be used for cooling, it is occasionally used to heat as well. Heating applications are uncommon, but they are still possible. Since a vortex tube creates a cold and hot stream of air; by controlling what the fraction of air is flowing out of the cold end you can create a temperature rise (a rise from the starting air temp) of up to 195F! Now that is hot.
If you have any questions about compressed air systems or want more information on any of EXAIR’s products, give us a call, we have a team of Application Engineers ready to answer your questions and recommend a solution for your applications.