A couple of weeks ago, I wrote about warranty claims…one, specifically, that I had recently received (it’s still worth a look even if you remember it well, just for another chance to see the old luggage commercial with the gorilla again.) I also advised my readers to stay tuned, which reminds me of another blast from my past as a kid who watched way too much TV in the early 1970’s…
We did, in fact, receive and evaluate the failed Stay Set Hose. This is a formal process by which our Quality Control team analyzes all the information that I can give them as to the application, installation, and use of the product. They then perform a detailed inspection, evaluation, and test (if needed) of the product in question. I won’t say we never find manufacturing or assembly problems, but our records indicate we’ve never found the same one twice…we’re keenly aware that the first time may be a mistake, but the second time is a choice.
More often than not, we find the problem is due to easily correctable installation, operation, or air supply problems. In this case, when we inspected the bendable element, we could see that it had been subjected to an unsupported, twisting motion, which had fatigued it at the point where it was bent, and sheared it away from its internal connection. The customer and I had already gone over the common best practices for their use (which included properly supporting the hose while bending…see pictures below,) so they got a replacement Stay Set Hose, and are back in operation.
If you’ve got questions about how EXAIR’s Intelligent Compressed Air Products…and accessories…can make better use of your compressed air, give me a call.