I recently worked with an extruded fence manufacturer who was looking to dry the material after a rinse process. The polyethylene fencing is 48″ wide with cells ranging from .25″ up to 2″ and the web is traveling at 5 meters per minute. After leaving the rinse bath, the web spans a 12′ area before being sent to a winder where they apply a tape before producing the finished rolls. It was in this area the company was looking to add a blow off device to remove the moisture to assure the tape would adhere to the surface.
After discussing the details with the customer of the area that needed to be covered, I recommended they use our 48″ Super Air Knife for the application. The Super Air Knife produces a high velocity, laminar sheet of airflow across the entire length of the knife. Operating at 80 PSIG, using a 40:1 amplification rate (entrained air to compressed air) the unit produces a velocity of 11,800 feet per minute while maintaining a low sound level of only 69 dBA. Air consumption is 2.9 SCFM per inch of knife when operated at 80 PSIG. Since the customer was looking to treat both sides of the fencing, they would need to mount a unit above and below the web for effective blowoff.
The Super Air Knife is the most efficient and quietest air knife offered on the market today. Available in lengths from 3″ up to 108″ in single-piece construction and offered in aluminum, 303ss or 316ss construction, they are the perfect choice for small scale or wide coverage blowoff applications. With help selecting the best EXAIR Air Knife for your process or to discuss your application, give me a call, I’d be happy to help.