A few weeks back I was contacted by a large baking company who was looking for a better way to pre-clean their cake and muffin pans before sending them to a wash cycle. After the pans exit the oven, an operator places the baked goods on a cooling conveyor then uses an air gun to blow out the residual crumbs. The pans are then placed on a separate conveyor and sent through a washer. The manual operation was taking a lot of extra time which resulted in reduced production.
After further discussion, I recommended they use our 24″ Super Air Knife. The Super Air Knife produces an even, high velocity curtain of air across the entire length of the knife which would provide a uniform blowoff of the pans, eliminating the manual cleaning. Super Air Knives are extremely efficient and quiet. Operating at 80 PSIG, using a 40:1 amplification rate of entrained ambient air to compressed air consumed, they require only 2.9 SCFM per inch of knife length while maintaining a low sound level of only 69 dBA and produce a velocity of 11,800 feet per minute.
The Super Air Knives are available in lengths from 3″ up to 108″ in single-piece construction and offered in aluminum, 303ss or 316ss construction, they are the perfect choice for small scale or wide coverage blowoff applications. To discuss a particular application or for help selecting the best EXAIR product to fit your need, contact an application engineer at 800-903-9247.
Muffins Anyone? photo courtesy of Amy via creative commons license.