Preventative Maintenance for EXAIR Filters

Good engineering practice calls for point of use filtration and moisture removal, such as that provided by EXAIR Filter Separators.

I read a white paper from Parker Hannifin about compressed air filters.  The idea behind the paper was to remember your filter replacements.  Compressed air can be dirty with water, oil, pipe scale, etc.  As the filters capture the contamination, it will start to build pressure drop.  Remember, pressure drop is a waste of energy in your compressed air system.

Majority of EXAIR products use compressed air for cleaning, cooling, conveying, static elimination, coating and more.  To help keep them running efficiently, it is important to supply them with clean, dry, pressurized air.  EXAIR offers a line of Filter Separators and Oil Removal Filters to supply quality air to your equipment.  In this blog, I will explain the two types of filters that we carry and the maintenance requirements.  Filters and preventative measures can play an important part in your compressed air system.

Filter Separators are used to remove bulk liquid and contamination from the compressed air stream.  They utilize a 5-micron filter with a mechanical separation to help remove large amounts of dirt and water.  This type of filter would be considered the minimum requirement for filtration.  Most of the Filter Separators come with an auto-drain to automatically dispense the collection of oil and water.  EXAIR offers a variety of port sizes and flow ranges to meet your pneumatic flow requirement.  For maintenance, the filter elements should be changed once a year or when the pressure drop reaches 10 PSID (0.7 bar), whichever comes first.  I created a list in Table 1 below showing the correct replacement element kits for each model number.  And for any reason, if the bowl or internal components get damaged, we also have Rebuild Kits as well.  Just remember, the air quality is very important for longevity and functionality of your pneumatic systems and even for EXAIR products.

The Oil Removal Filters can make your compressed air even cleaner.  They work great at removing very small particles of dirt and oil.  They are made from glass fibers and can remove particles down to 0.03 micron.  They are designed to collect small particles and to coalesce the liquid particles into a large droplet for gravity to remove.  Because of the fine matrix, Oil Removal Filters are not great for bulk separation.  If you have a system with lots of oil and water, I would recommend to use the Filter Separator upstream of the Oil Removal Filter.  As with the Filter Separator, the filter element should be changed once a year or at a pressure drop of 10 PSID (0.7 bar).  EXAIR also offers a variety of port sizes and flow ranges.  Table 1 below shows the replacement Element Kits as well as the Rebuild Kits.  If the application requires very clean compressed air, the Oil Removal Filter should be used.

Table 1

By using EXAIR filters, they will clean your compressed air to prevent contamination on parts, performance issues, and premature failures.  As an ounce of prevention, you should add the replacement elements in stock and enter them in your preventative maintenance program.  With quality air, your pneumatic system and EXAIR products will provide you with effective, long-lasting performance without any maintenance downtime.  If you would like to discuss the correct type of filters to use in your application, you can speak with an Application Engineer.  We will be happy to help you.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s