Have A Blast (Of Cold Air) With EXAIR Vortex Tubes & Spot Cooling Products

The operation of a Vortex Tube is one of the more peculiar phenomena in fluidics, and a particularly unique method of producing cold air. Since they don’t perform “heat transfer” in the classical sense (see below), there’s no RATE of heat transfer…they’re generating cold air, at rated flow and temperature, instantly.

Compressed air enters the Vortex Tube (blue arrow) where the Generator imparts a spinning motion to the flow, which continues towards the “hot end” (red ribbon). The flow is forced to change directions and continue spinning, flowing in the opposite direction (blue ribbon). It’s at this point that the flow gives up energy in the form of heat, which is exhausted through the Hot Valve (red arrows) while the cold flow makes its way to the opposite end, where it exits at temperatures up to 129F colder than the compressed air supply.

EXAIR Corporation’s Vortex Tubes come in a range of sizes & cooling capacities, and are integrated into a number of Spot Cooling Products which add convenience and flexibility to their operation. Consider:

  • Vortex Tubes themselves are perfect for the most basic of installations. Small and Medium models weigh only a few ounces; you can thread them directly onto an existing 1/8 NPT (Small) or 1/4 NPT (Medium) fitting, if you have one (or can get one) adjacent to where you want to blow the cold air. Hot and Cold Mufflers can be added for sound attenuation, and the Cold Caps have 1/4 NPT (Small) or 3/8 NPT (Medium) female threads if you want to use a short pipe or hose to direct the cold flow.
  • Most spot cooling applications are best handled with the higher air flows and moderate temperature drops associated with a Vortex Tube product set to a high cold fraction. We have three distinct products that have a pre-set, non-adjustable cold fraction, aimed at these situations:
    • Mini Cooler Systems are quiet, compact, and ready to install in minutes via a Swivel Magnetic Base. They’re ideal for cooling small tools, needles in industrial sewing machines, saw blades, or lens grinders, just to name a few of the more popular applications. These come with built-in hot muffler, and are available with a Single or Dual Outlet Cold Air Hose Kit.
    • For applications that call for a higher cooling capacity, we offer the Cold Gun Aircoolant Systems. These have a bar magnet built in to the Cold Gun itself, integral Hot and Cold Mufflers, and, like the Mini Coolers, come with Single or Dual Outlet Cold Air Hose Kits. They’re most popularly specified to replace mist coolant in machine tools, but are also used on routers, grinders, drills, larger saws, and even some non-machining applications like chill rolls and setting hot melt adhesives.
    • For even higher cooling capacities than that, the High Power Cold Gun can be used. Size-wise, it’s identical to the Cold Gun, but it generates twice the Cold Gun’s flow of cold air.
Mini Cooler (left) and Cold Gun (right).

One of the main advantages of using these Vortex Tube products with the pre-set higher cold fractions is the prevention of freeze-up…while the cold air generated is usually just a little below 32F (0C), ambient conditions in the areas where they’re used typically add enough heat to prevent mass freezing of any moisture condensed in the cooling process. A number of applications, however, do indeed call for much colder air flow than this, and for those, we’ve got the Adjustable Spot Cooler:

EXAIR Adjustable Spot Coolers can generate temperatures as low as -30°F (-34°C) instantly, and on demand.

Their versatility makes them a great “utility player” – when very cold air (well below zero) is needed, the Temperature Control Knob is turned counterclockwise. If another application calls for higher flow (like the Mini Coolers or Cold Guns), it can be turned clockwise for instant adjustment of flow and temperature.

Adjustable Spot Cooler Systems are available with Single or Dual Point Cold Air Hose Kits, and come with three Generators: 15 SCFM (installed), 25 SCFM, and 30 SCFM, to select the compressed air consumption, and hence, the overall flow range.

If you’ve got a spot cooling application, EXAIR Corporation has a Vortex Tube solution for you. Give me a call; let’s talk cold air!.

Russ Bowman, CCASS

Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Leave a Reply