First, let’s think about a gas station. When the fuel delivery truck fills the stations’ tank, the fuel is passed through a filter to make sure it’s free of water and debris. Then, as you are pumping it into your car, it passes through another filter! And then, in your car, the fuel is passed though another filter before it goes to your engine! Filtering your compressed air supply at several points is just as important, and a single filter at the compressor isn’t enough! That is where the point of use filters comes into play!

Dry Particulate Filters: Dry particulate filters are usually employed to remove desiccant particles after an adsorption dryer. They can also be implemented at point of use to remove any corrosion particles from the compressed air. Dry particulate filters operate similarly as a coalescing filter, capturing and retaining particles within the filter media.

Coalescing Filters: Coalescing filters are used for removing water and aerosols. Small droplets are caught in a filter media and merged into larger droplets that are then taken out of the filter. A re-entrainment barrier prevents these droplets from reentering the air. Most of the liquid coalescing filters remove is water and oil. These filters also remove particulates from compressed air, trapping them within the filter media, which can lead to pressure drops if not changed regularly. Coalescing filters remove most contaminants very well.

Adsorption Filters: Vapor removal filters are typically used to remove gaseous lubricants that will go through the coalescing filter. Because they use an adsorption process, vapor removal filters should not be used to capture lubricant aerosols. Aerosols will quickly saturate the filter, rendering it useless in a matter of hours. Sending air through a coalescing filter prior to the vapor removal filter will prevent this damage. The adsorption process uses activated carbon granules, carbon cloth or paper to capture and remove contaminants. Activated charcoal is the most common filter media because it has a large open pore structure; a handful of activated charcoal has the surface area of a football field.

Knowing the needs of your compressed air system can help you chose the right filter. If your air needs a high level of filtration or basic contaminants removed, cleaning your air is an important step in the compressed air process. Check out our compressed air filter options here!

Jordan Shouse
Application Engineer

Send me an Email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS