When you are using compressed air to Clean, Cool, and or Dry products in production the quality of compressed air you are using is very important. You wouldn’t want to be blowing oil or condensation from your compressed air onto a surface you are trying to dry. Or blowing debris on a surface you are trying to clean.
The most common type of oil removal filter uses a coalescing element. Oil entrained in pressurized gas flow isn’t as dense as water – so centrifugal elements won’t remove it – and it tends to act like particulate…but very fine particulate – so typical sintered particulate elements won’t remove it. Coalescing elements, however, are made of a tight fiber mesh. This not only catches any trace of oil in the air flow, but also much finer particulate than those sintered elements. EXAIR Oil Removal Filters, like the Model 9027 , provide additional particulate filtration to 0.03 microns. That’s some pretty clean air.
Dry Particulate Filters: Dry particulate filters are usually employed to remove desiccant particles after an adsorption dryer. They can also be implemented at point of use to remove any corrosion particles from the compressed air. Dry particulate filters operate in a similar manner as a coalescing filter, capturing and retaining particles within the filter media.
Coalescing Filters: Coalescing filters are used for removing water and aerosols. Small droplets are caught in a filter media and merged into larger droplets that are then taken out of the filter. A re-entrainment barrier prevents these droplets from reentering the air. Most of the liquid coalescing filters remove is water and oil. These filters also remove particulates from compressed air, trapping them within the filter media, which can lead to pressure drops if not changed regularly. Coalescing filters remove most contaminants very well.
Adsorption Filters: Vapor removal filters are typically used to remove gaseous lubricants that will go through the coalescing filter. Because they use an adsorption process, vapor removal filters should not be used to capture lubricant aerosols. Aerosols will quickly saturate the filter, rendering it useless in a matter of hours. Sending air through a coalescing filter prior to the vapor removal filter will prevent this damage. The adsorption process uses activated carbon granules, carbon cloth or paper to capture and remove contaminants. Activated charcoal is the most common filter media because it has a large open pore structure; a handful of activated charcoal has the surface area of a football field.
Knowing the needs of your compressed air system can help you chose the right filter. If your air needs a high level of filtration or basic contaminants removed, cleaning your air is an important step in the compressed air process. Check out EXAIRS filter options here!