Whenever spring rolls around, spring-cleaning comes to mind. It’s the time of year that we are reminded, or perhaps motivated, to start cleaning and de-cluttering. We experience this here at EXAIR with an increase in inquiries about our Industrial Housekeeping Products. We have a great line of drum vacs designed for use with dry materials (Chip Vac and Heavy Duty Dry Vacs) or liquids (Reversible Drum Vacs – RDVs, and Chip Trappers), or both (EasySwitch Wet-Dry Vac). What we don’t often think about are cleaning or maintenance routines for our cleaning products.

As long as you supply our intelligent compressed air-operated products with clean, moisture-free compressed air, they can run near indefinitely with little to no maintenance. Due to the nature of the kinds of jobs drum vacs are being used in, even with the cleanest compressed air systems, there is some need for preventative maintenance to keep them working like new. In this blog I review some basic cleaning routines to keep your RDV or Chip Trapper working as new:

• Ensure you are supplying enough compressed air. We recommend 80-100psig. This will consume at least 19scfm. If your supply line is too long, or too small in diameter, you will suffer line loss. This will lead to poor performance. It is also important to avoid any restrictive fittings like quick connects.
• Ensure there are no vacuum leaks. A loose vacuum hose, leaky hose cuff or a loose fitting drum adapter will prevent the pump from being able to evacuate enough air from the drum. Even small hairline cracks in the drum can allow air in and cause vacuum performance to suffer. A visual inspection of these areas is a great first step. We stock all replacement parts if you need to replace a gasket, or quick connect fitting.
• Ensure your compressed air supply is clean. The tight passages in the venturi chamber can become contaminated, limiting the RDVs’ ability to draw a vacuum. We recommend the use of a 5-micron automatic drain filter (EXAIR Model 9001) to prevent this. If the RDV has become dirty inside, it is relatively straight forward to clean it. This video takes you through the steps.

• Ensure the safety shutoff valve float is moving freely. The plastic float provides overflow protection. It will rise when the drum is full, which will break the vacuum. If the float becomes stuck, it will impede vacuum performance. Cleaning out this chamber and the float, allowing it to move freely will ensure that RDV can function properly.
• Finally, for Chip Trappers, ensuring that the directional valve is clean and clear of chips. With frequent use or when filtering out long stringy chips, the liquid flow passageways of the EXAIR Chip Trapper may become blocked with swarf. The following video walks you through cleaning this valve:

All of these steps will keep your RDV and Chip Trapper running like new. If you would like to learn more about our other Industrial Housekeeping Products, feel free to give us a call!

Al Wooffitt
Application Engineer

Send me an Email
Find us on the Web
Like us on Facebook
Twitter: @EXAIR_AW

Comet Cleaner image courtesy of garlandcannon. Creative Commons License