Controlling Temperature and Flow in a Vortex Tube


A few weeks ago, we looked at the Vortex Tube and provided a general overview of the device (see that blog here.)  In a nutshell – a Vortex Tube uses an ordinary supply of compressed air as a power source, creating two streams of air, one hot and one cold – resulting in a low cost, reliable, maintenance free source of cold air for spot cooling solutions.

One of the features of the Vortex Tube is that the temperature of the cold air and the cold air flow rate is changeable. The cold air flow and temperature are easily controlled by adjusting the slotted valve in the hot air outlet.

Vortex Tube Hot Valve Adjustment
Hot Valve Adjustment for a Vortex Tube

Opening the valve (turning it counterclockwise) reduces the cold air flow rate and the lowers the cold air temperature.  Closing the valve (turning it clockwise) increases the cold air flow and raises the cold air temperature.

VT Adjustment Table

As with anything, there is a trade off – to get higher a cold air flow rate, a moderate cold air temperature is achieved, and to get a very cold air temperature, a moderate air flow rate is achieved.

An important term to know and understand is Cold Fraction, which is the percentage of the compressed air used by the Vortex Tube that is discharged through the Cold End.  In most applications, a Cold Fraction of 80% produces a combination of cold flow rate and and cold air temperature that results in the maximum refrigeration or cooling output form a Vortex Tube.

For most industrial applications – such as process cooling, part cooling, and chamber cooling, maximum refrigeration is best and the 32XX series of Vortex Tubes are preferred.  For those applications where ‘cryogenic’ cooling is needed, such as cooling lab samples, or circuit testing, the 34XX series of Vortex Tube is best.

To set a Vortex Tube to a specific temperature, simply insert a thermometer into the cold air exhaust and adjust the hot valve.  Maximum refrigeration, at 80% Cold Fraction, is achieved when the cold air temperature drop is 50°F (28°C) from the incoming compressed air temperature. See the video posted here for measuring and lowering and the cold air temperature.

For those cases when you may be unsure of the required cold air flow rate and cold air temperature to provide the needed cooling in an application, we would recommend an EXAIR Cooling Kit.  The Cooling Kit contains a Vortex Tube, Cold Air Muffler, Air Line Filter, and a set of Generators that will allow for experimentation of the full range of air flows and temperatures possible.

EXAIR Vortex Tube Cooling Kit

To discuss your application and how a Vortex Tube or any EXAIR Intelligent Compressed Air Product can improve your process, feel free to contact EXAIR, myself, or one of our other Application Engineers. We can help you determine the best solution!

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB