This rebate example results in FREE air nozzles – read on to learn more!
Here at EXAIR we are continuously trying to share the basic facts that engineered air nozzles save compressed air. We then connect that with the amount of money that it saves, this is generally backed with formulas, this isn’t a new concept, we blog, tweet and even have easily accessed calculators for it. The final part that we like to share is that, on top of saving throughout the life of the nozzle, there are also many energy providers and municipalities that extend a rebate program as well! That means this lowers the ROI on implementing engineered nozzles into your system.
For instance, if your facility is located in Holland, Michigan, the Holland Board of Public Works wants to offer a rather simple rebate that requires the engineered nozzle and application be installed and submitted by December 31, 2022. The program is offering up to $100 per engineered nozzle installed on an open pipe or tube. (The incentive cannot exceed 100% of customer cost.) Not sure if you have open pipes in your facility? I’m sure you will hear them if you walk near the production lines where air is used. Or, better yet, get in touch with your production maintenance team and have them go throughout the facility and perform an open tube/pipe tagging event. Then report back and contact an Application Engineer here at EXAIR. We will all be able to help you with selecting the appropriately sized engineered nozzle to convert that open pipe/tube blowoff to an efficient and safe blowoff.
The Holland program is focused on open pipe/tube blowoffs while there are countless other programs out there which focus on replacing any blowoff with an engineered nozzle that also fits certain flow criteria for select pipe sizes. These programs can be searched by using the site Dsireusa.org This is a site that is maintained by NC State University and NC Clean Energy Technology. You can easily navigate to your state and scan the list for a rebate program which will then even take you to the application and stipulations for the selected incentive.
No matter where you are located in the world, you don’t have to use a rebate to save money by installing engineered nozzles. The savings and ROI all starts as soon as they are installed. The rebates available in various parts of the US are just ways to expedite the ROI. If you want to discuss any engineered nozzle application, contact an Application Engineer today.
Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF