EXAIR Cabinet Cooler in Bahrain Still Operating Years Later, In Harsh Conditions

img-20170110-wa0010
This small NEMA 12 type Cabinet Cooler has been in operation for years. Now, two additional units are needed for new applications.

A few weeks ago I was contacted by a mechanical contractor in Bahrain about a needed Cabinet Cooler.  Their customer had an existing unit in place and needed two more for similar applications.  As with any Cabinet Cooler need, we needed to start with an accurate understanding of the heat load involved, to make sure we recommend the proper model number.

So, we used the Cabinet Cooler Sizing Guide to gather the required information and calculate the heat load of the application.  After using this information to calculate a heat load of 426 BTU/hr. (~125W), we confirmed that the existing model 4308-240 will be the correct fit for the additional cabinets as well.

img-20170111-wa0000
Even in this dirty environment the Cabinet Cooler continues to function.

The existing Cabinet Cooler has been in operation for several years without any required maintenance or upkeep.  Clean compressed air, achieved with a simple 5 micron water/dirt filter separator,  is supplied to the unit and nothing but clean cold air is fed into the cabinet.  Relative humidity is regulated by the Cabinet Cooler to 45% resulting in stable temperatures and humidity for the electronics inside the enclosure.

img-20170110-wa0009
The dirt and debris are prevented from entering the enclosure due to the design of the Cabinet Cooler. Only clean, cold air enters the cabinet. Hot air is vented away.

This application is an excellent example of the durability of EXAIR products.  With proper compressed air supply our products will operate uninterrupted and at proper performance for years.  If you’re in need of a durable solution for an electrical enclosure, contact an EXAIR Application Engineer.

Lee Evans
Application Engineer
LeeEvans@EXAIR.com
@EXAIR_LE