Okay. Throughout our catalog and most of my training, many moons ago, we always stuck to using the E Vac Vacuum Generators as pick and place type units. Hook them up with some suction cups and you can have some fun. However, this isn’t all they can be used for. In fact, I blogged about it over a decade ago not being used for a pick and place operation. Rather, I used it to pull a steady vacuum on a hydraulic brake system in order to pull the fluid through the lines.
Today, I want to show you another trick that I am almost certain I saw when I was a kid on Mr. Wizard. I saw this in High School, learning from one of my amazing educators in the Science department, and then again in college taking basic Chemistry courses. The trick is maybe not something that you would use regularly, but it is a great visualization for something that may help some DIY’ers and even some industrial engineers. So what is the process exactly? Well, it is using a vacuum to “boil” water, except we aren’t really boiling the water, it just appears that way.
That’s right, in this video you can see I have a very small E-Vac Vacuum Generator connected to a glass jar with some water in it. Now there is some condensation in the jar from the water being warmer than the environment we were in. As I energize the E-Vac, you will see the operating pressure go up on the gauge to the right, and you will see the pressure in the jar go down on the vacuum gauge to the left. You can also see just how quickly the small E-Vac removes all the air from the chamber and then begins to build the vacuum, effectively pulling the gas from water, making it appear as though it is boiling due to a temperature increase. Instead, it is actually “de-gassing” the water and removing the oxygen.
This same process can be used in molding operations, epoxy resin processes, and even off-gassing operations. If you can get the surface or container into a vacuum condition, then an Inline E Vac or Adjustable E Vac can be used to evacuate the gases from the fluid within the chamber or area. This makes them more conducive for use without bubbles forming during the curing phase. The size of the E Vac needed for this will be determined by the size of the area and that is exactly what our Application Engineers are here to help with.
If you would like to discuss an off-the-wall idea or de-gassing, feel free to contact an Application Engineer today.
Brian Farno, MBA – CCASS Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF