Products Built to Last and Maintenance Free

As an avid outdoors man, I have learned a lot about myself during these days of quarantine and social distancing; mainly I don’t quarantine very well. With all the climbing gyms closed, traveling strongly discouraged, and social distancing in place my  lifestyle has been brought to a grinding halt much like many of us. opening up, which will be good for all of us. 

So, in place I have taken upon myself to learn a new hobby that I can do solo and safely. In the past weeks I have spent learning about mountain biking and all that comes with it. This includes the maintenance required to work on a bike, specifically the front derailleur which controls the front major gear changes (and gets damaged if crashed). Realigning the front derailleur is one of the hardest fixes that one can do on a bike as it has three different adjustments that need to be made at the same time. Thus, I embarked on a week long project of learning how to make the adjustment and man was it frustrating.

Performing tricky maintenance can be one of the most frustrating and stress inducing things when all you really want is for something to work without any hassle. Whether its hours just trying to figure out what the issue is or actually fixing it, let’s be honest, it never goes as planned. The same can be said for maintenance on things such as compressors, cars, and production equipment. Here at EXAIR we strive to eliminate this frustration and hair pulling maintenance and replace it with maintenance free products.

EXAIR’s lines of compressed air products such as our Vortex Tubes, Super Air Amplifiers, and Super Air Knives have no moving parts. No moving parts means no wear down parts and no wear down parts means little to no maintenance. Besides the occasional air filter element change out or something getting lodged inside the product EXAIR’s compressed air products will run almost indefinitely as long as they are supplied with a source of compressed air, typically run through a standard 5 micron filter separator. 

Although you cannot really prevent dirt from collecting in a filter separator (that is, in fact what they are meant to do) you can prevent dirt, dust, and debris from getting into your products by using one of EXAIR’s Filter Separators. Filter Separators remove water condensate, dirt, dust, and debris from your compressed air line before it enters your compressed air product. This prevents the particles from disrupting small air outlets or lodging in the small pathways inside our compressed air products and keeps the product running like new.

All in all, maintenance is not fun to have to deal with and can be costly at times. By using EXAIR’s engineered compressed air products you can eliminate at least one thing to worry about on your list of maintenance that needs to be performed. With a little bit of preventive measures you can keep our products running like new for years and years.

If you have any questions or want more information on any EXAIR’s of our products, give us a call, we have a team of application engineers ready to answer your questions and recommend a solution for your applications.

Cody Biehle
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook