EXAIR Manufactures Custom Solutions with Precision and Speed

Customs
An Air Amplifier with a PTFE plug (left,) a curved Super Air Knife (center,) and a flanged Line Vac are just a few ways EXAIR has provided custom solutions.

Because EXAIR designs and manufactures our own products here in Cincinnati, we can take advantage of the speed, control, and flexibility that comes with full service manufacturing. If you need a customization of a current production product or if you would like to start a compressed air application from scratch, we can probably help. This is true throughout our entire product line, the following custom examples are of our Super Air Knife products.

Do you have an application that may not be best served by one of our stock Super Air Knife products? While we have quite a variety of both materials, sizes, and connection types sometimes a special application requires a special solution. For this reason,  EXAIR manufactures special Super Air Knives suited EXACTLY for the type of application or environment that it’ll be operating in.

Unique applications are fairly common, and the Super Air Knife provides a great solution to many of them.  Consider these situations:

  • A machine builder had to fit an air knife in a 43″ channel.  We had it covered: we made them a custom (non-stock) 43″ 303SS Super Air Knife and shipped it in three days.
  • A user needed 15″ (and only 15″) of air flow.  A Model 110018 18″ Aluminum Super Air Knife, off the shelf, would provide an “overflow” which would disturb product in the vicinity of the blow off.  We had it covered…a custom shim can be made to provide 15″ (and only 15″) of air flow out of an 18″ Super Air Knife.  It only takes a couple of days to get the special shim. We can make shims to center the airflow, keep it all on one side of the knife, have it come out two separate areas etc.
  • Our customer needed the lightweight of the aluminum air knife, but the ambient air temp was causing the stock plastic shim to melt and cause leaks. So we made a custom 4″ Super Air Knife and installed a Stainless Steel Shim.
custom air knives
If your application is more challenging than a custom shim, we’ve also made Air Knives with (left to right) curved radius, special material (glass filled PEEK shown here,) flat, double-sided, and even one with end-mount threaded holes.

We’ve also made a variety of special Air Knives, when more than just length is a consideration.  So, even if your application is “Unique” it’s very likely that we still have you Covered. Give us a call and we can prove it to you!

Jordan Shouse
Application Engineer
Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS