It feels good to be home after visiting with our distributors in Costa Rica (Dansar Industries) and Nicaragua (Optima Industrial) last week. Both companies were more than pleasant, had tremendously knowledgeable inside and outside sales forces, and were well informed about the intricacies of compressed air. I was also able to meet and spend time with our distributor from El Salvador, ECOBLITZ.
Dansar Industries, Costa Rica
While in Costa Rica, I made visits to a few end users of EXAIR products. Our distributor, Dansar Industries, had projects going with existing clients to increase production efficiency, lower compressed air use, and lower noise levels. One application was to cool and dry extruded rubber after quenching through a dip tank. The process in place was to use approximately 6-8 nozzles operating continuously, regardless of the presence of product. The compressed air use was unknown, but certainly very high, and the sound level was over 103 dBA. We installed and tested an EXAIR Super Air Wipe, lowering the compressed air use, and dropping the sound level to 84 dBA. That’s akin to cutting the sound level in half, then cutting it in half again. Coupled with an Electronic Flow Controller, the compressed air use was further reduced by consuming compressed air only when product was present.
Optima Industrial, Nicaragua
While in Nicaragua, the full engineering team was trained on EXAIR products. Receptive and enthused, we parted ways with a friendly contest among the engineers to see which could present EXAIR products most effectively. The winner received dinner for two on the house. With such commitment and capabilities in Optima, we’re optimistic for the future.
Working with international distributors and end users is a daily pledge for EXAIR. If you need information about a distributor in your country or are interested in becoming an EXAIR distributor, our door is always open. We also have a new tool to locate international distributors, here.