## How it Works: Theory Behind the Vortex Tube

What is a vortex tube and how does it work? A vortex tube is a device used to separate compressed air into a cold and hot stream of air; but the main question that many people have theorized is how does this device work.

In 1928 George Ranque, a French physics student stumbled upon this phenomenon on accident while he was performing experiments on a vortex type pump. During the experiment George noticed that hot air was being exhausted from one side and the other side was producing cold air. Eventually the device was forgotten about until 1945 when the German physicist, Rudolph Hilsch published a paper describing the device, eventually causing it to gain popularity and find applications in the industrial world.

The diagram bellow is one of the widely accepted explanations for the vortex tube phenomenon.

When the vortex tube is supplied with compressed air the air flow is directed into the generator that causes spin into a spiraling vortex at around 1,000,000 rpm. This spinning vortex flows down the neck of the hot tube denoted in the diagram as red. The control valve located on the end of the hot tube allows a fraction of the hot air to escape and what does not escape reverses direction and travels back down the tube in a second vortex denoted in blue. Inside of the low-pressure area of the larger outer warm air vortex, the inner vortex loses heat as it flows back to the front of the vortex and as it exits the vortex expels cold air.

The phenomenon is theorized to occur because both the hot and cold streams rotate at the same velocity and direction. This means that a particle of air in the inner vortex makes a complete revolution in the same time that a particle in the outer vortex takes to make a complete revolution. This effect is known as the principle of conservation of momentum and is the main driving force behind the vortex tube. In order for the system to stay in equilibrium air particles lose energy, in the form of heat, as they move from the outer stream to the inner stream, creating the cold air vortex that gets expelled.

If you have questions about Vortex Tubes, or would like to talk about any of the EXAIR Intelligent Compressed Air® Products, feel free to contact EXAIR and myself or any of our Application Engineers can help you determine the best solution.

Cody Biehle
Application Engineer
EXAIR Corporation
Visit us on the Web