EXAIR Super Air Knives Improve Efficiency For Beer Bottling Application

As summer begins to wind down, we’re seeing some “slight” reprieve (at least this week) from the intensely hot summer we’ve had thus far in 2022. Fall will be here before we know it, which for me means a return to weekends on the couch watching football! What goes better with football than an ice cold beer?

In a recent application, I worked alongside a beverage manufacturer to help improve on the efficiency of their beer bottling process. You know the saying, “you get what you pay for”. For this customer it was made quite evident as we replaced some rather inefficient nozzles they were using in the facility with our Super Air Knives.

In the process, the customer had (4) sets of inefficient nozzles to dry the bottles off. (2) sets were located just after their wash/rinse cycle, with another two placed just prior to labeling. After washing, the bottles are taken to the fill station where they perform a cold fill process. Their location is hot and humid year-round, so immediately after filling condensation would form on the outside of the bottle.

Once filled, they need to apply a label to the outside of the bottle. If there’s any condensation present, this leads to many of the labels not adhering properly. The issue they were having was that when all of the nozzles were running simultaneously, they were experiencing a pressure drop that led to insufficient drying of the bottles in both stages of the process. Their solution was a rather expensive one: (8) operators were staged at the end of the line to inspect, dry, and fix any of the labels that didn’t adhere well while boxing them up.

Since we knew compressed air consumption was a critical aspect of this application, we offered (2) of our Model 110006-.001 6” Super Air Knives with a .001” thick shim installed. Super Air Knives are shipped directly from stock with a .002” shim, so this thinner shim helped to further reduce the air consumption from the knife. The knives produce a laminar curtain of air that’s far more effective at drying than the turbulent airflow from these flat nozzles. Rather than having (4) sets of knives, they were able to use just (2) effectively eliminating two of the blowoff stations they were using with the cheap nozzles.

With the knives in place the pressure in their system was no longer dropping and the laminar airflow from the Super Air Knives was much more effective at drying the bottles. Now, at the end of the conveyor they only needed (2) operators to unload the bottles and begin to box them. This dramatically reduced their labor costs for this operation as they were able to utilize those employees for other tasks instead of tying them up standing around, drying bottles, and fixing labels.

If you’re tired of experiencing issues with an inefficient blowoff device, EXAIR has a solution that can ship out today from stock. Contact an Application Engineer today and we’ll be happy to help you to determine the best solution based on your application.

Tyler Daniel, CCASS

Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD

beer image courtesy of RawPixel Ltd via Flickr Creative Commons License

Universal Air Knife Mounting System Saves You Time & Money

Using EXAIRS Universal Air Knife Mounting System greatly ease’s the installation of all Air Knives (Except PVDF).  It will save you the time and expense of designing and fabricating your own mounting system which will maximize your uptime and keep your staff focused on key plant tasks!

Please note the table below that highlights the recommended number of the Universal Air Knife Mounting System to use for the various length of Air Knives.

Length Of Air Knife Number of UAKMS
3″ – 18″ 1
24″ – 54″ 2
60″ 3
72″ – 95″ 4
96″ – 108″ 5

If you would like to discuss Universal Air Knife Mounting System, Air Knives or any EXAIR compressed air product, I would enjoy hearing from you…give me a call.

Steve Harrison
Application Engineer

Send me an email
Find us on the Web 
Follow me on Twitter
Like us on Facebook