Super Air Amplifier Increases Airflow In Vaccum Hood For Fume Extraction

A couple days ago I  took a call from an extrusion company who was looking to increase the airflow in their plating operation. They manufacture several different shapes and styles of aluminum extrusions by the way of 8 large extrusion presses. On one of the presses they make a specialty line of products that are sent to a finishing operation to be anodized.

Above the anodizing process tanks they use a vacuum hood to capture fumes and send them to a scrubber system so the air can be cleaned before being exhausted. They were starting to see an increase in the level of VOC (Volatile Organic Compound) gases in the area and, after some internal testing, determined the existing system wasn’t moving enough air through the system for the gases to be adequately delivered to the scrubber tank.

Example of a scrubber system

After further discussion, the customer ordered our Model # 120022 2″ Super Air Amplifier to test under our Unconditional 30 Day Guarantee.  Air Amplifiers are one of the most efficient products in the EXAIR catalog. Using a patented internal shim, they use a small amount of compressed air that passes through an internal chamber where it is exhausted through a thin gap at high velocity. This directed airflow creates a lower pressure at the intake side which draws in a large amount of free air. The 2 combining air flows result in a large volume of “amplified”, high velocity exhausting airflow, making them ideal for increased air movement.

Air Amplifiers entrain enormous amounts of “free” air, at ratios of up to 25:1!

If you have an application where you need to increase airflow or if you’re looking to vent or exhaust noxious fumes, an Air Amplifier is the ideal choice. For help selecting the best Model or to discuss a particular process, please contact an application engineer for assistance.

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

 

Pueblo Chemical Agent-Destruction Pilot Plant Agent Processing Building courtesy of PEO ACWA via creative common license.

 

Heavy Duty Line Vac Helps to Fill a Scrubber with Aluminum Pellets

Aluminum granules

An overseas company was using aluminum granules to react with caustic vapors inside a scrubber system.  The scrubber was a large tank that stood 4 meters high (13 feet), and it was located outside of the facility (see photo below).  Their current process was to refill the scrubber tank with aluminum pellets every three to four months to replenish the bed.  In order to refill, they would use a ladder with a bucket to pour the aluminum in the top opening of the tank.  This was a time-consuming process as well as an unsafe practice.  They contacted EXAIR to see if we could help them.

Scrubber Filling scenario

In discussing the details further about their application, the aluminum pellets were stored in 208L (55 gallon) drums.  The diameter of the pellets ranged from 5 to 15mm (0.2 to 0.6 inches) and the bulk density was 1500 Kg/m^3 (94 lbs/ft^3).  The maximum conveyance distance was 4 meters (13 feet) horizontally and 4 meters (13 feet) vertically.  The customer required a simple device to transfer the material from the drums to the scrubber tank safely and ergonomically at the fastest conveyance rate possible.

Heavy Duty Line Vac Kit

From the information above, I recommended the EXAIR model 152200; 2” Heavy Duty Line Vac Kit.  This vacuum generator is made from a hardened steel construction which is very resistant to wear.  It is also designed for higher vacuum levels to convey heavier materials at a faster rate.  The Line Vac is operated by compressed air to generate a Venturi vacuum, and the kit will include a filter, regulator and a bracket for cleaning, controlling and mounting.  The vacuum generator does not have any motors or moving parts to wear, and the inline design makes it simple to attach a hose to the vacuum and exhaust side.  Now, the operator could place the hose inside the scrubber tank, stand near the drum with the Line Vac; open a valve to regulated air, and watch the Line Vac move the entire drum of aluminum granules inside the tank.  Instead of multiple trips up and down a ladder to pour in buckets of aluminum, the operators can fill the scrubber tank easily and quickly.

The EXAIR Air Operated Conveyors, or Line Vacs™, are great tools for conveying items in a “bucket and ladder” type of application.  If your company manually moves product from point A to point B, you can contact an EXAIR Application Engineer to see if an Air Operated Conveyor could improve your process.  For the overseas customer above, the model 152200 Heavy Duty Line Vac Kit improved the manual operation of filling while reducing hazardous issues.

John Ball
Application Engineer

Email: johnball@exair.com
Twitter: @EXAIR_jb