A couple days ago I took a call from an extrusion company who was looking to increase the airflow in their plating operation. They manufacture several different shapes and styles of aluminum extrusions by the way of 8 large extrusion presses. On one of the presses they make a specialty line of products that are sent to a finishing operation to be anodized.
Above the anodizing process tanks they use a vacuum hood to capture fumes and send them to a scrubber system so the air can be cleaned before being exhausted. They were starting to see an increase in the level of VOC (Volatile Organic Compound) gases in the area and, after some internal testing, determined the existing system wasn’t moving enough air through the system for the gases to be adequately delivered to the scrubber tank.
After further discussion, the customer ordered our Model # 120022 2″ Super Air Amplifier to test under our Unconditional 30 Day Guarantee. Air Amplifiers are one of the most efficient products in the EXAIR catalog. Using a patented internal shim, they use a small amount of compressed air that passes through an internal chamber where it is exhausted through a thin gap at high velocity. This directed airflow creates a lower pressure at the intake side which draws in a large amount of free air. The 2 combining air flows result in a large volume of “amplified”, high velocity exhausting airflow, making them ideal for increased air movement.
If you have an application where you need to increase airflow or if you’re looking to vent or exhaust noxious fumes, an Air Amplifier is the ideal choice. For help selecting the best Model or to discuss a particular process, please contact an application engineer for assistance.
Because they might be needed in some pretty aggressive environments, EXAIR offers many of our Intelligent Compressed Air Products in a variety of materials. One particular material of construction, however, has two distinct benefits. PEEK (Polyether Ether Ketone, for those of us who ruined the grading curve in CHEM102) plastic offers not only superior chemical corrosion resistance; it’s also non-marring. Since EXAIR introduced the first PEEK Super Air Nozzle in 2005, they’ve been specified all over the world; sometimes for their corrosion resistance; other times so they won’t mar or scratch sensitive surfaces…and every once in a while, for both.
I recently had the pleasure of discussing blow off applications with the production manager of a large anodizing & plating company. The chemicals used in these processes are extremely corrosive, and the equipment used in those areas has to be made of something that’ll handle it. PEEK plastic is just such a material. Also, once they’ve treated their customers’ parts, they need to handle them with care…they’re getting paid a premium to provide nice, shiny parts with a perfect finish. When they’re blowing them off, they need to use something that won’t scratch up the surface if the operator makes incidental contact with the blow off tip. Again, PEEK plastic is just such a material. Since their existing blow offs were fitted to 1/8 NPT connections, they chose the Model 1102-PEEK Mini Super Air Nozzle.