If you are familiar with our blog, you will see where I have recently written about coaching my oldest son’s pee wee football team this year. Things slowed down this past week as the team had a bye so that meant a “free” weekend or as my wife called it – “a chance to do some of the things you have put off over the last few months”. On the top of the list was painting our bedroom.
My oldest son loves to help with projects and I never want to discourage him so when he asked if he could help, of course the answer was “yes”. Not only did this mean I had to spend some extra $ to get some supplies “for kids”, as he put it, I also needed to spend some time explaining what he needed to do. As we started to prep the walls, I went ahead and cut in around the ceiling, doors, baseboard and trim. My plan was that I would paint the top portion of the wall while he worked on the lower. I set up his little roller and watched him paint about a 4 foot wide section and much to my surprise he did a pretty good job. My wife needed a hand with our infant son, so I felt somewhat confident leaving our oldest unsupervised for a few minutes. BIG mistake!
When I got back upstairs, he had painted over the baseboard, trim and managed to drip paint all over the hardwood floors. When I asked him what happened, he responded with “well dad, I wanted to hurry because it’s really nice outside and I NEED to go out and play! Besides you said you were going to have to clean up anyway”. Go outside son, PLEASE, go outside and play. Now not only did I have to clean up the paint, but I also had to spend more money on new baseboard and trim because there is no way I was going to be able to salvage his masterpiece. Maybe I should have spent a little while longer explaining the process? Regardless, my next few moments of “free” time have all been filled.
Taking the time to review your compressed air system can be very important to your company’s efficiency. In many industrial settings/facilities, the compressed air system is an opportunity for savings and efficiency. In fact, the largest motor in a plant is often on the compressor itself. Leaving a small compressed air leak unattended or using an inefficient blowoff for a long period of time can result in very expensive electrical waste. This excessive expense and waste can negatively affect a company’s profit margin as well as reduce performance and increase production costs.
Measure the compressed air usage using a flow meter. Once you have identified your usage, you can work on finding a more efficient alternative.
Use a leak detector to locate expensive, wasteful leaks.
Replace the inefficient sources with a more efficient engineered solution.
Operate the compressed air only when it’s needed. Our Electronic Flow Control (EFC) is an ideal choice to use for on/off service or to set up on a timed basis.
Install a Receiver Tank to provide additional compressed air supply for applications requiring large amounts of compressed air.
Control the supply pressure to the device using a regulator. Sometimes operating at lower pressure can still be effective and can reduce the overall energy cost of the operation.
While I can’t recommend my son to lend (2) little helping hands, I might be able to provide some assistance with optimizing your compressed air system. Give us a call at 800-903-9247 to see how we can help.