We’ve seen in recent blogs that Compressed Air Dryers are an important part of a compressed air system, to remove water and moisture to prevent condensation further downstream in the system. Moisture laden compressed air can cause issues such as increased wear of moving parts due to lubrication removal, formation of rust in piping and equipment, quality defects in painting processes, and frozen pipes in colder climates. The three main types of dryers are – Refrigerant, Desiccant, and Membrane. For this blog, we will review the basics of the Refrigerant type of dryer.
All atmospheric air that a compressed air system takes in contains water vapor, which is naturally present in the air. At 75°F and 75% relative humidity, 20 gallons of water will enter a typical 25 hp compressor in a 24 hour period of operation. When the the air is compressed, the water becomes concentrated and because the air is heated due to the compression, the water remains in vapor form. Warmer air is able to hold more water vapor, and generally an increase in temperature of 20°F results in a doubling of amount of moisture the air can hold. The problem is that further downstream in the system, the air cools, and the vapor begins to condense into water droplets. To avoid this issue, a dryer is used.
Refrigerant Type dryers cool the air to remove the condensed moisture and then the air is reheated and discharged. When the air leaves the compressor aftercooler and moisture separator (which removes the initial condensed moisture) the air is typically saturated, meaning it cannot hold anymore water vapor. Any further cooling of the air will cause the moisture to condense and drop out. The Refrigerant drying process is to cool the air to 35-40°F and then remove the condensed moisture. The air is then reheated via an air to air heat exchanger (which utilizes the heat of the incoming compressed air) and then discharged. The dewpoint of the air is 35-40°F which is sufficient for most general industrial plant air applications. As long as the compressed air stays above the 35-40°F temperature, no further condensation will occur.
The typical advantages of Refrigerated Dryers are-
- – Low initial capital cost
- – Relatively low operating cost
- – Low maintenance costs
If you have questions about getting the most from your compressed air system, or would like to talk about any EXAIR Intelligent Compressed Air® Product, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.
Send me an email
Find us on the Web
Like us on Facebook