If you’ve ever cleaned around the house (and who hasn’t?), you’re probably familiar with atomized liquid spraying…it’s what happens when you squeeze the trigger on that bottle of cleaner that breaks down the stove top grease in the kitchen and the ring-around-the-tub in the bathroom.
There’s a variety of industrial and commercial applications that require an atomized liquid spray too…applications that are beyond the scope of an operator with a trigger-operated spray bottle. That’s where EXAIR Atomizing Spray Nozzles come in. We have three types: Internal Mix, External Mix, and Siphon Fed. Depending on what you want to spray, and how you want to spray it, one of these is likely going to work better than the others for you. Today, we’re going to examine the Internal Mix Atomizing Spray Nozzles.
Better mist: Because the liquid & air come together inside the air cap, this results in very fine atomization.
Range of adjustment: Regulating either the liquid or air pressure supply will change the flow rate AND the flow pattern, giving each individual nozzle a wide performance band. The needle valve can “fine tune” the flow and pattern with even greater precision.
Area of coverage: With five patterns (Narrow or Wide Angle Round, Flat Fan, Deflected Flat Fan, and 360° Hollow Circular) and 72 distinct models to choose from, you can get spray patterns from 2″ (1/8 NPT Narrow Round Model AN8010SS) to 13 feet (1/2 NPT 360° Hollow Circular Model AT5010SS.)
Flow rate: Again, because of the many models available, you can get from 0.6 gallons/hour (Model AN8010SS again) to 264 gallons/hour (1/2 NPT Wide Angle Round Model AW5030SS.)
No-Drip option: The standard Models have a needle valve, which, as mentioned above, gives you the ability to make minute changes to the flow rate & pattern. If the application calls for rapid on/off control, or the chance of an errant drip after flow is not stopped might be a problem, the needle valve can be replaced with a No-Drip assembly. This positively shuts off liquid flow, at the exit of the liquid cap, when air pressure is secured.
Easy installation: All of our Atomizing Spray Nozzles have female NPT (1/8, 1/4, or 1/2) ports. The 1/8 and 1/4 NPT models can be adequately supported – and positioned – with a Stay Set Hose, and all models (even the 1/2 NPT) can be used with an appropriately sized Swivel Fitting. If you want to use your own tubes or hoses, we’ve got “clip-in” style Mounting Brackets.
Interchangeability: The only difference between any model of the same-size Atomizing Spray Nozzle is the Liquid and/or Air Cap. If your application’s liquid spray requirements change, or vary, you don’t need to replace the whole nozzle; just one (or in some cases, both) of the caps.
Internal Mix Atomizing Spray Nozzles are ideal for liquid viscosity up to 300cP and in situations where the liquid is (or can be) pressure fed. If you’d like to discuss a liquid spraying application and/or product selection, give me a call.