Are you tired of having to scrounge around the production floor for the right fittings to precisely position your air nozzle? Not only is it a pain to try and find the correct fittings, extensions, etc. but once you do the position of the nozzle is hard to adjust. To alleviate this problem, EXAIR has designed a variety of different sized swivel fittings that allow you to precisely position the nozzle, then easily tighten and lock into place.
EXAIR’s Swivel Fittings are available in 9 different sizes, from as small as 1/8” NPT male x M4 x .5mm female and up to 1” NPT male x 1” NPT female. The smaller swivels (M4-M6) are constructed of 316 stainless steel and the swivels ranging from 1/8 NPT – 1” NPT are available in 303 stainless steel. The Swivel Fittings allow for movement of 25 degrees from the center axis for a total movement of 50 degrees. This permits correct placement of the blowing angle, helping to optimize the performance of your blowoff process. With no gaskets or seals to wear out, there’s no maintenance required to maintain optimum performance.
Swivels can be used on any of our Air Nozzles up to 1” and can also be used with the Adjustable and Super Air Amplifiers. By simply adding a “W” suffix to the part number, the correctly sized swivel fitting will be added to your order. For example, an 1122W would be one of our 2” Flat Super Air Nozzles with a ¼ NPT male x ¼ NPT female Swivel Fitting included. Stop wasting time trying to find the proper fittings and positioning for your blowoff nozzles! Contact an Application Engineer and get some of EXAIR’s Swivel Fittings on order today, available from stock.