I wrote recently about a “textbook” application for EXAIR Cabinet Cooler Systems…overheating control cabinets on a factory floor, solved quickly & easily with stock product, off the shelf, installed in minutes.
“Well, la-di-da, Russ,” some may say, “You sure knocked that whiffleball out of the park, didn’t you? What about those of us with more complex requirements than a plain Jane electric box on a typical production floor?”
To them, I would say:
1. Yes we did, and thank you for noticing!
And
2. Read on.
EXAIR manufactures, and stocks, a number of special Cabinet Cooler Systems to meet most any need:
Food and pharmaceutical processing areas often call for specific materials of construction. Something that doesn’t corrode, something that isn’t susceptible to surface wear or pitting in a washdown environment…something like Type 316 Stainless Steel. For these cases, we also offer our complete line of NEMA 4X Cabinet Cooler Systems in optional 316SS construction, from 275 Btu/hr (69 Kcal/hr) to 5,600 Btu/hr (1,411 Kcal/hr.) And they’re all in stock.
EXAIR Cabinet Cooler Systems work best on a sealed enclosure, but sometimes it’s not feasible to completely seal an enclosure – there may be a cable bundle coming through a common penetration, or perhaps the door isn’t fitted with a gasket. In cases where such equipment still needs to be protected from dust, fumes, or other environmental contaminants, you could always use a Continuous Operation Cabinet Cooler System. But, if you want to control operating costs with Thermostat Control, our Non-Hazardous Purge option provides a continuous positive flow, even when the internal temperature is below the Thermostat setpoint, to prevent these contaminants from entering. These are all in stock as well.
When we calculate heat load, we use your Sizing Guide data to determine both internal heat load (generated by the components in the enclosure) and external heat load (generated by the ambient temperature in the area.) Regardless of the internal heat load, enclosures in extremely hot locations need protection too. When the ambient temperature will exceed 125°F, a High Temperature Cabinet Cooler System is specified…performance is identical, but they’re outfitted to withstand the higher temperatures for durability and long lasting operation. This option is offered for all of our Cabinet Cooler Systems 1,000 Btu/hr and higher, and they are also all in stock.
No matter the challenges of your facility’s environment, we can help. Again…all of the above options are in stock, ready for immediate shipment. What could be better?
Well, actually, we ARE giving away free stuff with Cabinet Cooler System orders through the end of July 2018:
So…don’t overheat your electronics from the inside, or out, wherever they’re located. If you’d like to find out more, give me a call.
Russ Bowman
Application Engineer
Find us on the Web
Follow me on Twitter
Like us on Facebook