The Best Angle is the Try-Angle

The importance of Swivel Fittings for your Air Nozzles

Hey there. So I was asked to write about our Swivel Fittings for Air nozzles. My first thought was, hmmm isn’t everything you need to know about a swivel fitting in the name Swivel Fitting? I started writing and then editing, and then rewriting, and then more editing. I don’t want my blog to be boring and just skimmed over, or worse not read at all!

Then just like a Mike Tyson uppercut it hit me. It’s all about the angle. The angle that you are blowing the air (and for me the angle I am taking in writing this blog) means a lot.

We talk a lot about using air intelligently. Your compressed air is in fact one of your largest utility expenses. My colleague just wrote a Blog about air being your 4th Utlity – read that here. There are many ways to control this expense such as: finding air leaks with our Ultrasonic Leak Detector, using the Electronic Flow Control and turning air off when not in use, using the lowest pressure and volume of air necessary to accomplish the task, just to mention a few. One thing that gets overlooked a lot is the importance of blowing air at the perfect angle to achieve the maximum effect.

Now, some of you remember how to do all of the equations to find this precise angle and that is wonderful, however most of us will struggle with these calculations as there are so many variants involved. Even if we did the math we would then need to engineer the exact fixture to hold the chosen nozzle in this precise place. So what do we do?

Let’s Fast forward to the point where you have already chosen and installed the best EXAIR Air Nozzle for your application. You are confident that the pressure, the flow, the SCFM, the pattern, and the material are all perfect. You install this on your set fixture, and OMG it’s not producing the desired effect. You then realize that everything is right about this, other than the nozzle is just not hitting the surface at the correct angle. All of our nozzles are built to attach and blow straight, inline with any fitting. The stationary fitting could be on a machine, a pipe, a hose or even an air gun. You then realize that for maximum performance – you need this nozzle to be angled off of the fitting, not straight.

We understand that your application is unique to you.  And your solution should be just as unique. Your distance and method to mount the nozzles or jets is unique to your application. Your system’s air pressure with all its power (or weakness) is all you. Your environment is just that – yours. It would be hard to believe that a straight nozzle will always be the canned solution. It would be a stretch to say that the exact angle that you need to blow air is going to always be straight. In fact, I would venture to say that a nozzle by itself is rarely the best solution. When using compressed air intelligently, we need to look at all the – umm – angles…. and one of the most important aspects that gets overlooked is finding the exact angle necessary for the perfect air movement in your unique application.  A few degrees can make a big difference in the overall efficiency of air flow. 

Now it comes down to finding the perfect angle. You can do all that math if you want. Or you can test several different angles very easily. This is what I like to call the TRY-ANGLE. This brings us full circle to the Swivel Fittings. This is the best way to find the precise angle to solve your process problem. EXAIR’s swivel fittings permit a movement of 25 degrees from center axis, for a total movement of 50 degrees. They are available from M4 x 0.5mm female X 1/8 MNPT through 1 MNPT X 1 FNPT.

Sometimes we over engineer and think projects to death. We spend hours thinking and miss the window of opportunity to DO! Many times the simplest solution is the best solution. Yes, sometimes it can be this easy… When buying nozzles, it’s worth the little extra to get these little gems. Some times 10° makes all the difference in the world…

Thank you for stopping by. Please reach out for assistance with any of your process problems, chances are – we have a solution.

Brian Wages, Application Engineer

EXAIR Corporation
Visit us on the Web
Follow me on Twitter

Boxer image courtesy of Mohamed_Hassan Pixaby License
Math image courtsey of Geralt Pixaby License

Leave a Reply