EXAIR’s Heavy Duty Safety Air Gun is designed to provide powerful blasts of compressed air for use in rugged, industrial environments. With a larger 3/8 NPT air inlet compared to our other Safety Air Guns, it allows for higher force and flow values. It comes with a durable cast aluminum body and ergonomic composite rubber grip. The wide curved trigger allows for continuous use for hours without operators experiencing fatigue.
All of EXAIR’s Safety Air Guns come with an engineered compressed air nozzle at the tip. This allows you to remain OSHA compliant while still getting the force you need to get the job done. EXAIR’s Super Air Nozzles utilize the coanda effect to entrain large amounts of ambient air from the environment. This ambient air mixes with the primary airstream and is projected towards the target with more force and flow than the supplied compressed air could deliver alone.
Each of the Safety Air Guns is available with extensions fully assembled ranging from 6”-72”. You can simply add a “-“ and the required length, in inches, to the end of any Safety Air Gun Model number.
In addition, they’re also available with a Chip Shield to prevent any chips or debris from coming back toward your operators. Effective chip guarding is another component of OSHA 1910.242(b) in addition to the concerns of dead-end pressure. To add a Chip Shield onto the gun as well, a “-CS” to the standard Model number. For example, a Model 1310-12-CS would be a 1310 gun with 12” extension and a Chip Shield installed. If the application involves blowing off metal chips or shavings, your operators will certainly appreciate this Chip Shield preventing the debris from blowing back over them.
With EXAIR’s Heavy Duty Safety Air Gun, you can still achieve the high forces required for tough applications without the risk of injuries to personnel. Do yourselves and your operators a favor and get one on order today!