Customizing Air Amplifiers

EXAIR’s line of Air Amplifiers can be found in a multitude of different applications across the world. They solve problems as simple as blowing debris off parts to exhausting fumes or circulating air. The Air Amplifier comes in two different styles either the Super Air Amplifier or the Adjustable Air Amplifier. Super Air Amplifiers come in a stock Aluminum Body with a diameter that ranges from ¾” to 8”. This differs from the Adjustable Air Amplifier which comes in either type 303 Stainless Steel or Aluminum and are Sized from ¾” to 4”.

The main difference between the Super Air Amplifier and the Adjustable Air Amplifier is the fact the Super Air Amplifier has a shim inside of it that sets the gap for the air flow. The standard shim thickness for the Super Air Amplifier in sizes of 3/4″ to the 4″ is 0.003” which is suitable for most applications. These shims can be exchanged for a thicker shim of thickness of either 0.006″ or 0.009″. The 8″ Super Air Amplifier is the only air amplifier that comes with a standard stock shim of 0.009″ and can be exchanged for a 0.015″ shim if needed.

Flanged Stainless Steel Adjustable Air Amplifier
Sanitary Flanged Adjustable Air Amplifier

Even though there is a wide variety of sizes and materials for the Stock Air Amplifiers they may not meet a customer’s specific application or need. Over the years EXAIR has produced many different custom Air Amplifiers for a customer’s specific need and the images throughout this blog are just a few of what we have done.

High Temp Air Amplifier

• Depending on the environment certain specific materials may be required like the food industry which requires specific Stainless Steel for various applications. One customer had a special PTFE plug made for the Adjustable Air Amplifier to help pull a sticky material through the process. The PTFE helped prevent the material form depositing on the Amplifier.
• For applications were mounting may be an issue, special attachments have been made to assist. For instances were an Amplifier may need to be mounted to a pipe a custom Stainless-Steel Adjustable Air Amplifier with a class 150 raised face flanges.
• Applications that are in a hot environment may require a special high temperature version which has be developed to operate in areas up to 700°F. The High Temperature Air Amplifier was so widely sought after that we turned it into a stock item. It is commonly used in large roto-molds and ovens to circulate air in order to maintain consistent temperatures.

Adjustable Air Amplifier with PTFE Plug Installed

No matter what your application needs are EXAIR will to work with you to create any custom Air Amplifier that fits your specific application needs.

If you have any questions about compressed air systems or want more information on any of EXAIR’s products, give us a call, we have a team of Application Engineers ready to answer your questions and recommend a solution for your applications.

Cody Biehle
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Adjustable Air Amplifiers Solve Cooling and Air Circulation Problems

An EXAIR Adjustable Air Amplifier

An EXAIR Air Amplifier is a compressed air-driven device designed to utilize a small volume of compressed air and transform it into a large volume airflow.  This is done by throttling the compressed air through a small gap within the Air Amplifier, and allowing a controlled volume to escape.  This escaping compressed air flow adheres to a Coanda profile, changing its flow direction and resulting in an entrainment of ambient air.  The end result is an amplification of as much as 25x the output airflow compared to the inlet compressed air flow.  And, this already amplified volume of air continues entraining air as it exhausts from the Air Amplifier, resulting in further amplification.

But, what if you are uncertain of the air volume needed in your application?

When exploring any solution, there are bound to be uncertainties.  There may be application parameters which will change or remain unknown, a need to produce multiple airflow volumes within a given space, or simply a desire to have variability in the solution package.  If any of these apply, an Adjustable Air Amplifier is worth consideration.

EXAIR Adjustable Air Amplifiers utilize the same approach mentioned above to entrain ambient air, while allowing infinite adjustment of the incoming compressed air.  This translates to an infinite adjustment of the output airflow, allowing for fine tuning in an application to move the maximum volume of air with minimal compressed air use.

Arrows and text identify the components of an Adjustable Air Amplifier

To adjust compressed air consumption of an Adjustable Air Amplifier, simply loosen the locking ring, turn the “plug” within the “body” to increase or decrease the airflow, and retighten the locking ring.  There are no parts or components to change, just an easy, simple adjustment.

Aluminum and Stainless Steel Adjustable Air Amplifiers

Our adjustable units are available from stock in aluminum and 303 grade stainless steel, and in sizes from ½” to 4” in outlet diameter.  This range of size and materials (from stock) allows for proper sizing and adjustability within an application, while maintaining the integrity based on materials requirement.

For applications with high ambient temperatures and a desire to take advantage of the adaptability of Adjustable Air Amplifiers, a High Temperature Adjustable Air Amplifier is available upon request with our Application Engineers. These units withstand ambient temperatures of 700F (374C) and are useful to circulate hot air within ovens to provide consistent temperatures. They have been used within large rotational molds to prevent hot spots to maintain even material thickness. High Temperature Adjustable Air Amplifiers solve circulation and cooling problems with zero maintenance or breakdown concerns.

No matter the material of construction or application temperature, EXAIR Adjustable Air Amplifiers allow infinite adjustment of input and output flows while entraining a huge volume of ambient air.  This ability, to entrain high volumes of ambient air with small volumes of compressed air, is an expertise of EXAIR, which serves us well in helping customers with applying this principle to do work.  For example, if you were to need to cool a cast part and needed a large volume of airflow to complete the task, we can not only provide the products to do so, but also the engineering support to help determine the required air volumes.

Let us help you find an efficient solution to your application today.  We’re available by phone (1-800-903-9247), email (, online chat (, and our social media handles (@EXAIR_LE).

Lee Evans
Application Engineer