Custom Solutions For Conveying Dry Material

The ideal solution for conveying large volumes of material over long distances.

EXAIR’s Line Vac compressed air operated conveyors have no moving parts or motors to wear out, providing a maintenance free way to move dry material from one location to another. We offer several different types and sizes of Line Vacs like our Standard Line Vacs, available from 3/8″ up to 5″  or our Threaded Line Vacs, with NPT threaded connections up to 3″. The Heavy Duty Line Vac are constructed of Hardened Alloy for superior abrasion resistance, available in sizes from 3/4” to 3”, smooth and threaded connections or the Light Duty Line Vac commonly used for smaller volume, shorter distance processes, with sizes from 3/4″ to 6”. We even offer Sanitary Flange Line Vacs from 1-1/2″ up to 3″ for processes requiring frequent cleaning. All of these products are in stock, ready to ship from our factory here in Cincinnati, Ohio.

For over 34 years, EXAIR has been manufacturing Intelligent Compressed Air Products and we understand that there may be “special” cases where a stock product isn’t going to fit a specific need or requirement. What sets us apart from our competition is that we are able, with a little help from the customer, to engineer and manufacture custom made products, like the Line Vac Conveyors, to fit the specific demand of a unique application.

A few examples are shown below:

Flanged design, easy to install


This special 3/4″ Stainless Steel flanged Line Vac is being used to remove acidic vapors after a silicon wafer etching process. The flanged design allowed the user to direct mount to the machine, eliminating the need for other expensive modifications.

 

 

 

Chemical resistant construction for washdown areas

 

 

A customer was needing a special Line Vac for a chloride wash area due to the aggressive chemicals. We were able to make a custom 1-1/2″ Line Vac in PVDF construction for corrosion resistance and QF flanges for easy maintenance and cleaning.

 

 

 

Custom funnel design for small, granulated material like sugar or salt

 

This special funnel shaped Line Vac is being used in a a small packet filling operation. The unique design assured for a clog free process by keeping the granulated material moving through the tube.

 

 

 

 

 

Miniature size for confined workspaces

 

A company was needing a miniature version of a Line Vac to remove microscopic debris in an integrated circuit chip making process. The barb fittings allowed for easy installation into the small work place.

 

 

 

 

 

These are just a few examples of how we are able to meet the demands of a wide variety of extraordinary processes. Whether you are looking to move “common” materials like plastic pellets or maybe something “off the wall”, chances are we have the resources to provide an engineered solution to fit your need. Our application engineers are standing by, so give us a call and let us put our expertise to work for you!

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

 

 

Custom, Flanged Air Amplifier Solves a Fume Evacuation Problem

We blog about this topic quite a bit, and almost every section of our catalog has a page set aside just for special / custom product configurations that have been created by request from many of our customers.

This is the latest and greatest special that I have seen roll through the production area here at EXAIR.   This is a special 4″ 303 Stainless Steel Adjustable Air Amplifier with a 4″ Tri-Clamp flange on the discharge side and a 6″ Tri-Clamp flange on the suction side of the amplifier.

 

This had been an ongoing project with the customer that started with them testing a stock Adjustable Air Amplifier in the application to ensure that the performance would meet their needs.  The application was to boost a low flowing fume exhaust that was causing slow downs in their production line.  Fans and other traditional methods would require maintenance and would wear out.  The stock Adj. Air Amplifiers exceeded their performance needs but did not easily mount into their duct work because they used all standard size tri-clamp fitting in the ducting, so the next step was to see if we could manufacture a Special Adjustable Air Amplifier just for their needs.  The dimensions of the existing Adjustable Air Amplifier came close enough we were able to easily create a Flanged Adjsutable Air Amplifier that would clamp straight into their existing duct work, exceed their performance expectations, help their process, and be ready to ship within a very reasonable lead time.

Like we have said before, if a stock, cataloged, product doesn’t fit your application exactly, contact us and let us find a way to customize and fit the need.

Brian Farno
Application Engineer Manager
BrianFarno@EXAIR.com
@EXAIR_BF