We blog about this topic quite a bit, and almost every section of our catalog has a page set aside just for special / custom product configurations that have been created by request from many of our customers.
This is the latest and greatest special that I have seen roll through the production area here at EXAIR. This is a special 4″ 303 Stainless Steel Adjustable Air Amplifier with a 4″ Tri-Clamp flange on the discharge side and a 6″ Tri-Clamp flange on the suction side of the amplifier.
This had been an ongoing project with the customer that started with them testing a stock Adjustable Air Amplifier in the application to ensure that the performance would meet their needs. The application was to boost a low flowing fume exhaust that was causing slow downs in their production line. Fans and other traditional methods would require maintenance and would wear out. The stock Adj. Air Amplifiers exceeded their performance needs but did not easily mount into their duct work because they used all standard size tri-clamp fitting in the ducting, so the next step was to see if we could manufacture a Special Adjustable Air Amplifier just for their needs. The dimensions of the existing Adjustable Air Amplifier came close enough we were able to easily create a Flanged Adjsutable Air Amplifier that would clamp straight into their existing duct work, exceed their performance expectations, help their process, and be ready to ship within a very reasonable lead time.
Like we have said before, if a stock, cataloged, product doesn’t fit your application exactly, contact us and let us find a way to customize and fit the need.