Customizing Air Amplifiers

EXAIR’s line of Air Amplifiers can be found in a multitude of different applications across the world. They solve problems as simple as blowing debris off parts to exhausting fumes or circulating air. The Air Amplifier comes in two different styles either the Super Air Amplifier or the Adjustable Air Amplifier. Super Air Amplifiers come in a stock Aluminum Body with a diameter that ranges from ¾” to 8”. This differs from the Adjustable Air Amplifier which comes in either type 303 Stainless Steel or Aluminum and are Sized from ¾” to 4”.

The main difference between the Super Air Amplifier and the Adjustable Air Amplifier is the fact the Super Air Amplifier has a shim inside of it that sets the gap for the air flow. The standard shim thickness for the Super Air Amplifier in sizes of 3/4″ to the 4″ is 0.003” which is suitable for most applications. These shims can be exchanged for a thicker shim of thickness of either 0.006″ or 0.009″. The 8″ Super Air Amplifier is the only air amplifier that comes with a standard stock shim of 0.009″ and can be exchanged for a 0.015″ shim if needed.

Flanged Stainless Steel Adjustable Air Amplifier
Sanitary Flanged Adjustable Air Amplifier

Even though there is a wide variety of sizes and materials for the Stock Air Amplifiers they may not meet a customer’s specific application or need. Over the years EXAIR has produced many different custom Air Amplifiers for a customer’s specific need and the images throughout this blog are just a few of what we have done.

High Temp Air Amplifier

• Depending on the environment certain specific materials may be required like the food industry which requires specific Stainless Steel for various applications. One customer had a special PTFE plug made for the Adjustable Air Amplifier to help pull a sticky material through the process. The PTFE helped prevent the material form depositing on the Amplifier.
• For applications were mounting may be an issue, special attachments have been made to assist. For instances were an Amplifier may need to be mounted to a pipe a custom Stainless-Steel Adjustable Air Amplifier with a class 150 raised face flanges.
• Applications that are in a hot environment may require a special high temperature version which has be developed to operate in areas up to 700°F. The High Temperature Air Amplifier was so widely sought after that we turned it into a stock item. It is commonly used in large roto-molds and ovens to circulate air in order to maintain consistent temperatures.

Adjustable Air Amplifier with PTFE Plug Installed

No matter what your application needs are EXAIR will to work with you to create any custom Air Amplifier that fits your specific application needs.

If you have any questions about compressed air systems or want more information on any of EXAIR’s products, give us a call, we have a team of Application Engineers ready to answer your questions and recommend a solution for your applications.

Cody Biehle
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Custom Solutions For Conveying Dry Material

The ideal solution for conveying large volumes of material over long distances.

EXAIR’s Line Vac compressed air operated conveyors have no moving parts or motors to wear out, providing a maintenance free way to move dry material from one location to another. We offer several different types and sizes of Line Vacs like our Standard Line Vacs, available from 3/8″ up to 5″  or our Threaded Line Vacs, with NPT threaded connections up to 3″. The Heavy Duty Line Vac are constructed of Hardened Alloy for superior abrasion resistance, available in sizes from 3/4” to 3”, smooth and threaded connections or the Light Duty Line Vac commonly used for smaller volume, shorter distance processes, with sizes from 3/4″ to 6”. We even offer Sanitary Flange Line Vacs from 1-1/2″ up to 3″ for processes requiring frequent cleaning. All of these products are in stock, ready to ship from our factory here in Cincinnati, Ohio.

For over 34 years, EXAIR has been manufacturing Intelligent Compressed Air Products and we understand that there may be “special” cases where a stock product isn’t going to fit a specific need or requirement. What sets us apart from our competition is that we are able, with a little help from the customer, to engineer and manufacture custom made products, like the Line Vac Conveyors, to fit the specific demand of a unique application.

A few examples are shown below:

Flanged design, easy to install


This special 3/4″ Stainless Steel flanged Line Vac is being used to remove acidic vapors after a silicon wafer etching process. The flanged design allowed the user to direct mount to the machine, eliminating the need for other expensive modifications.

 

 

 

Chemical resistant construction for washdown areas

 

 

A customer was needing a special Line Vac for a chloride wash area due to the aggressive chemicals. We were able to make a custom 1-1/2″ Line Vac in PVDF construction for corrosion resistance and QF flanges for easy maintenance and cleaning.

 

 

 

Custom funnel design for small, granulated material like sugar or salt

 

This special funnel shaped Line Vac is being used in a a small packet filling operation. The unique design assured for a clog free process by keeping the granulated material moving through the tube.

 

 

 

 

 

Miniature size for confined workspaces

 

A company was needing a miniature version of a Line Vac to remove microscopic debris in an integrated circuit chip making process. The barb fittings allowed for easy installation into the small work place.

 

 

 

 

 

These are just a few examples of how we are able to meet the demands of a wide variety of extraordinary processes. Whether you are looking to move “common” materials like plastic pellets or maybe something “off the wall”, chances are we have the resources to provide an engineered solution to fit your need. Our application engineers are standing by, so give us a call and let us put our expertise to work for you!

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

 

 

Custom, Flanged Air Amplifier Solves a Fume Evacuation Problem

We blog about this topic quite a bit, and almost every section of our catalog has a page set aside just for special / custom product configurations that have been created by request from many of our customers.

This is the latest and greatest special that I have seen roll through the production area here at EXAIR.   This is a special 4″ 303 Stainless Steel Adjustable Air Amplifier with a 4″ Tri-Clamp flange on the discharge side and a 6″ Tri-Clamp flange on the suction side of the amplifier.

 

This had been an ongoing project with the customer that started with them testing a stock Adjustable Air Amplifier in the application to ensure that the performance would meet their needs.  The application was to boost a low flowing fume exhaust that was causing slow downs in their production line.  Fans and other traditional methods would require maintenance and would wear out.  The stock Adj. Air Amplifiers exceeded their performance needs but did not easily mount into their duct work because they used all standard size tri-clamp fitting in the ducting, so the next step was to see if we could manufacture a Special Adjustable Air Amplifier just for their needs.  The dimensions of the existing Adjustable Air Amplifier came close enough we were able to easily create a Flanged Adjsutable Air Amplifier that would clamp straight into their existing duct work, exceed their performance expectations, help their process, and be ready to ship within a very reasonable lead time.

Like we have said before, if a stock, cataloged, product doesn’t fit your application exactly, contact us and let us find a way to customize and fit the need.

Brian Farno
Application Engineer Manager
BrianFarno@EXAIR.com
@EXAIR_BF