EXAIR Line Vacs: Dozens Of Models; Endless Applications

With 119 distinct Models, EXAIR Line Vacs are used to convey everything from down feather to steel shot.  They’re versatile, reliable, durable, and incredibly easy to install and operate.  Consider this list of uses, starting with our smallest Line Vac, and going to our largest:

  • Model 6058 3/8″ Stainless Steel Line Vacs pull mica from a bulk container and spray it into a mold for making decorative stones, to apply a glittery surface.  They used to do it by hand, but the Line Vacs spread it more consistently.
  • A Model 6079 1/2″ Aluminum Line Vac pulls small metal scraps from a metal trimming operation, as they’re cut, keeping the work area clean.
  • Model 130075 3/4″ Light Duty Line Vacs perform a similar function in a plastic cutting machine, conveying away cut chips and eliminating the need for periodically stopping the machine to clean up.
  • A medical device manufacturer saw a 50% increase in productivity when they went from removing flash by hand from molded silicon parts to using a Model 6061 1″ Stainless Steel Line Vac to suction it away automatically.
  • A mining equipment manufacturer reclaims sand from a secondary operation on their green sand molds with a Model 6062 1-1/4″ Stainless Steel Line Vac.  This keeps their mold area clean, and has eliminated waste in production.
  • Model 140125 1-1/4 MNPT Aluminum Threaded Line Vacs eliminated a  “bucket and ladder” operation where cotton seeds needed to be loaded into 7-foot high hoppers.
  • Model 151150 1-1/2 MNPT Heavy Duty Threaded Line Vacs, fitted into black iron pipe systems, reclaim hot metal chips from a deep channel milling machine, automating the transfer to the recycling hopper.  This eliminated the risk of lifting AND burn injuries from the manual handling of the hot chips.
  • Model 6084 2″ Aluminum Line Vacs vacuum trim scrap from custom label making machines to a central scrap bin, keeping the floor clean, and keeping operators from having to empty individual bins at each machine.
  • A Model 6065 2-1/2″ Stainless Steel Line Vac conveys rejected peanuts (identified and segregated by a vision sorting machine) from the catch pan to a large collection hopper.  This is hauled away at the end of each shift, instead of an operator paying constant attention to the catch pan.
  • Model 161300-316 3″ Sanitary Flange Line Vacs replaced mechanical conveyors in a grain mill, incorporating a totally enclosed Clean In Place (CIP) system.  This greatly reduced contamination controls when the product was openly conveyed, and actually increased their conveyance rates of their bulk grains.
  • A Model 6087 4″ Aluminum Line Vac conveys an additive (in pellet form) into an asphalt mixer, replacing an auger conveyor that left product in the hopper and would clog regularly, resulting in messy spills.
  • A company that recycles spent ammo from gun ranges uses a Model 6088 5″ Aluminum Line Vac to convey the granulated rubber backstop material into their truck.  After the ammo is separated, they use the Line Vac to replenish the granulated rubber into the backstop.
  • A Model 130600 6″ Light Duty Line Vac conveys linen squares (mostly 12″ and 24″ square) through the main header of a sorting operation in a commercial laundry facility.  The system also incorporates several Model 120024 4″ Super Air Amplifiers in individual “pickup” branches.
The EXAIR Line Vac is a fast, low cost way to convey most any bulk material.

No matter what kind of bulk material you need to move, EXAIR has a Line Vac product for it.  If you’d like to find out more, give me a call.

Russ Bowman
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Custom Solutions For Conveying Dry Material

The ideal solution for conveying large volumes of material over long distances.

EXAIR’s Line Vac compressed air operated conveyors have no moving parts or motors to wear out, providing a maintenance free way to move dry material from one location to another. We offer several different types and sizes of Line Vacs like our Standard Line Vacs, available from 3/8″ up to 5″  or our Threaded Line Vacs, with NPT threaded connections up to 3″. The Heavy Duty Line Vac are constructed of Hardened Alloy for superior abrasion resistance, available in sizes from 3/4” to 3”, smooth and threaded connections or the Light Duty Line Vac commonly used for smaller volume, shorter distance processes, with sizes from 3/4″ to 6”. We even offer Sanitary Flange Line Vacs from 1-1/2″ up to 3″ for processes requiring frequent cleaning. All of these products are in stock, ready to ship from our factory here in Cincinnati, Ohio.

For over 34 years, EXAIR has been manufacturing Intelligent Compressed Air Products and we understand that there may be “special” cases where a stock product isn’t going to fit a specific need or requirement. What sets us apart from our competition is that we are able, with a little help from the customer, to engineer and manufacture custom made products, like the Line Vac Conveyors, to fit the specific demand of a unique application.

A few examples are shown below:

Flanged design, easy to install


This special 3/4″ Stainless Steel flanged Line Vac is being used to remove acidic vapors after a silicon wafer etching process. The flanged design allowed the user to direct mount to the machine, eliminating the need for other expensive modifications.

 

 

 

Chemical resistant construction for washdown areas

 

 

A customer was needing a special Line Vac for a chloride wash area due to the aggressive chemicals. We were able to make a custom 1-1/2″ Line Vac in PVDF construction for corrosion resistance and QF flanges for easy maintenance and cleaning.

 

 

 

Custom funnel design for small, granulated material like sugar or salt

 

This special funnel shaped Line Vac is being used in a a small packet filling operation. The unique design assured for a clog free process by keeping the granulated material moving through the tube.

 

 

 

 

 

Miniature size for confined workspaces

 

A company was needing a miniature version of a Line Vac to remove microscopic debris in an integrated circuit chip making process. The barb fittings allowed for easy installation into the small work place.

 

 

 

 

 

These are just a few examples of how we are able to meet the demands of a wide variety of extraordinary processes. Whether you are looking to move “common” materials like plastic pellets or maybe something “off the wall”, chances are we have the resources to provide an engineered solution to fit your need. Our application engineers are standing by, so give us a call and let us put our expertise to work for you!

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

 

 

EXAIR Line Vac, Air Operated Conveyors, Expand to Include Sanitary Flange Models

EXAIR’s Air Operated Conveyor product line just expanded, making it easier than ever for a wide range of industries to solve an ever growing range of bulk conveyance applications. Before we get to that, let’s look at just how versatile the Line Vacs are:

The standard Line Vac has been making bulk conveyance as easy as it could get for years now. They come in sizes from 3/8″ to 5″, and all you need is a hose to move material from point A to point B.

Lightweight and durable aluminum is the most popular choice, but we make them in stainless steel (Types 303 and 316) for heat and corrosion resistance. For extreme heat, the High Temperature option affords protection to 900F (482C) in either 303SS or 316SS.

When rigid pipe is preferable to hose, our Threaded Line Vacs offer the same performance:

These come with male NPT threads from 3/8″ to 3″. They’re also available in aluminum, 303SS and 316SS, and High Temperature versions, same as the standard Line Vac.

If you need high power for higher conveyance rates, longer distances, or very dense material, the Heavy Duty Line Vacs are what you’re looking for.

They come in sizes from 3/4″ to 3″, with options for slip-on hose or threaded pipe. They’re also made of a hardened alloy for superior abrasion resistance.

Light Duty Line Vacs are aimed at applications implied by the name…when smaller volumes of low density material don’t require all the head & flow generated by the standard or Heavy Duty models, these are as quick & convenient as the rest, and come in sizes from 3/4″ to 6″.

They’re also ideal when fragile parts might be subject to damage in the high velocity, turbulent air flow produced by the other models.

The newest additions to the Line Vac family are the Type 316 Stainless Steel Sanitary Flange models:

Also known as Tri-Clamp or Tri Clover, these connectors have a variety of advantages beneficial to certain industries: Quick to make up & take apart. No nooks or crevices, so they’re easy to clean. Wide variety of fittings, pipe and tubing are readily available.

These are especially popular in pharmaceutical, food, and brewing applications.

If you’d like to find out more about how to move bulk product quickly, easily, safely, and cleanly, give me a call.

Russ Bowman
Application Engineer
Find us on the Web
Follow me on Twitter
Like us on Facebook