Video Blog: Intellistat Emitter Point Replacement

EXAIR’s patented Intellistat Ion Air Gun has been designed to eliminate static in sensitive processes like electronics testing or assembling, clean processes and laboratories. This video illustrates the ease of replacing its emitter point, which may be necessary after long term use. The video shows you how to open up the gun and replace the emitter point inside. It is a very simple process and will take only minutes. The tools needed are a 3/16″ socket and some pliers.

If you have any questions about compressed air systems or want more information on any of EXAIR’s products, give us a call, we have a team of Application Engineers ready to answer your questions and recommend a solution for your applications.

Cody Biehle
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Video Blog: Cleaning Gen4 Ionizing Bars

EXAIR’s Gen4 Super Ion Air Knife and Ionizing Bars are a great way to relieve static charges in your products and/or processes.  They are a very powerful, efficient design that will eliminate static charges and require only minimal maintenance to keep them performing at peak efficiency.

Check out the video below to see just how easy it is!

When you are looking for expert advice on your static relief application or any of our safe, quiet and efficient point of use compressed air products give us a call.   We would enjoy hearing from you!

Steve Harrison
Application Engineer
Send me an email
Find us on the Web 
Follow me on Twitter
Like us on Facebook