EXAIR’s patented Intellistat Ion Air Gun has been designed to eliminate static in sensitive processes like electronics testing or assembling, clean processes and laboratories. This video illustrates the ease of replacing its emitter point, which may be necessary after long term use. The video shows you how to open up the gun and replace the emitter point inside. It is a very simple process and will take only minutes. The tools needed are a 3/16″ socket and some pliers.
If you have any questions about compressed air systems or want more information on any of EXAIR’s products, give us a call, we have a team of Application Engineers ready to answer your questions and recommend a solution for your applications.
Cody Biehle Application Engineer EXAIR Corporation Visit us on the Web Follow me on Twitter Like us on Facebook
I’ve mentioned it before and I’ll say it again. You can’t teach experience. This was told to me by a mentor at a previous job and of course, younger me thought, “Yeah, yeah I know all I need to know.” Well, younger me was an idiot and learned many things through experience. Sometimes I am still a slow learner and eventually, I remember those experiences and make decisions based on them. So what does this have to do with o-rings, seals, and gaskets?
I’m in the midst of a light construction project in my house and have reached a stage where some tools that I do not have would come in handy and make the job faster. Younger me would have justified purchasing a new one, experienced me understands a budget and reached out to my network of friends and a good friend said they had the tool I needed. This was a compressed air powered framing nail gun. Straight through nailing, no-problem, toe-nailing, no-problem, this thing won’t break a sweat and your arms will be stronger by the time you are done using it while your thumbs are screaming thank you for not smashing me a hundred times.
This loan did come with two conditions, one was, he didn’t have any nails to give with it. This was not a problem as I wouldn’t expect a friend to give me free fasteners with a tool loan. The second is the one that concerned me, he said, it does leak a little air but it should still shoot just fine. After working in the compressed air industry for over a decade I have experienced this many times. At that point I knew if you could hear it, chances were it was a bad leak. Upon further inspection, there was a cylinder gasket and rubber spring that were in pieces.
Nothing that a trip to a local business couldn’t take care of. A few new parts and discussion with their knowledgeable staff and I had the information needed to rebuild this nail gun to functioning status.
Oddly enough, my experience and expertise with how the EXAIR products like the No-Drip Air Atomizing Liquid Spray Nozzles operate and how to rebuild them, provided a good foundation about how this tool worked. This repair ended up being very similar to the rebuild on a No-Drip Spray Nozzle.
This story is two-fold, filtration could have prevented a lot of the damage to this gun. This gun uses a good amount of air volume at an expedient pace so keeping it clean and clear of debris helps extend the lifetime of internal parts. See my video on what happens without filtration below.
The second part is that maintaining and understanding processes to clean/rebuild are crucial to sustainable function of a machine. The cleaning process for this gun was fairly straightforward and using the correct lubricant for reassembly was another critical role. This culminated in a framing nail gun that can now be used to further my project and will more than likely live another decade before needing a rebuild again. That is if filtration and proper lubrication are followed.
Had I not obtained experiences throughout my career that helped me to understand how this tool functioned, the worth of a reliable network of vendors, and the necessity to complete tasks that take me out of my comfort zone I wouldn’t be in the place I am today. Because I have the experience and the network to ask for help it enables me to keep machines running that could have cost valuable production hours had this been a production environment.
EXAIR stocks rebuild kits, gaskets, shims, and parts for all of our product lines which may require a repair. For products which need to be cleaned in order to return back to new performance, we have the instructions or can do it for you here. From time to time they may need a repair or refurb in order to keep functioning at peak performance. If you want to build your trusted network or learn more about how to rebuild or clean EXAIR products, contact us.
I’ve written before about my lifelong dedication as a fan of the Cincinnati Reds. If you follow baseball, you can probably appreciate how excited I am at the very real prospect of some postseason action at Great American Ballpark. It’s kindling memories of the World Series Championship team from 1975-1976 who, coincidentally, reunited for the dedication of Joe Morgan’s statue at the ballpark recently.
It also got me thinking about how cool it is when stuff lasts a good, long time. I had the pleasure to talk with a customer about a Reversible Drum Vac the other day…it needed a new gasket in the quick connect assembly that attaches the vacuum hose to the drum. The caller mentioned that it had been in service for quite some time, and wanted to make sure that “today’s” gasket would fit “yesterday’s” Reversible Drum Vac. I assured him it would, because the design hasn’t changed. Out of curiosity, I looked up the original purchase. It was in 1995, which means that this was one of the very first Reversible Drum Vacs that EXAIR made.
When someone asks about our products’ guarantee, and we tell them it’s “Five Years; Built To Last,” they’re usually impressed. I’m going to start telling them they ain’t seen nothing yet.
This year, EXAIR is celebrating 30 years in business. That means there are a LOT of EXAIR products out there, and (hopefully) a good many “oldies but goodies.” If you’ve got one, we’d love to hear from you about it.