Selecting the proper Cabinet Cooler to solve your electrical panel overheating problems is simplified by using the Cabinet Cooler Sizing Guide and allowing EXAIR Application Engineers to calculate which Cabinet Cooler will be best. It is important to size Cabinet Coolers properly to ensure the most efficient cooler is chosen and the proper NEMA rating is chosen for your cabinet. This video illustrates how simple it is to gather the information for a long term solution to heat related problems.
Cabinet Coolers install in minutes, not hours. They protect your electronics from seasonal hot weather spikes, normally high temperature environments, or too much heat dissipation from electrical components in an enclosure. EXAIR’s selection of Cabinet Coolers include NEMA 12, 4 and 4X ratings. They normally operate with a thermostat control to turn themselves on and off as needed throughout the years and this is the most efficient way to run them. They are available from stock to solve your problem quickly and will fit nearly any environment with a variety of materials (Aluminum, 303 stainless steel or 316 stainless steel) and temperature ratings.
If you have any questions, please contact EXAIR.
Ph. 1-800-903-9247 (U.S. & Canada) 1-513-671-3322
Without putting too much thought into it, one might assume that January would not be Cabinet Cooler season. But actually, our friends in the southern hemisphere (Australia, New Zealand, South Africa, Argentina, Chile and Brazil) are experiencing their summer at the very same time that we in the mid-west of the United States have been having some bone-chilling cold weather blow in from Canada. Our New Zealand distributor told me just the other day that they were having 35°C days with water restrictions and everyone is on fire watch because it is so hot and dry right now.
As uncomfortable as that might be for the folks living there, many must continue their production in the un-air conditioned environments. And in doing so, they have to keep their machines up and running to maintain production. But the controls for those machines are not always so cooperative because the CPU is overheating or the inspection camera is giving out because it is too hot.
Where do they turn? EXAIR of course. Once our distributor partner assists the customer with sizing and makes recommendation (sometimes with a little help from us). The customer installs the Cabinet Cooler System and has taken care of their overheating problem within the application once and for all.
The reason why I say “once and for all”, is that the Cabinet Cooler Systems have no moving parts and are virtually maintenance-free. There are no filters to constantly change due to dirty factory environments. And best of all, the Cabinet Cooler can continue to operate in the range of 20 years plus.
When you compare the small cost of a Cabinet Cooler System to that of down time, lost production and the cost to repair burnt out controls, it is truly an easy decision to make.
So, back to our friends in the Southern Hemisphere, where hot and dry is the order of the day, consider having an EXAIR Cabinet Cooler for your application today. Contact us in the International Application Engineering / Sales Department or consult our International Distributor Locator to find the distributor near to you.
Neal Raker, International Sales Manager