EXAIR Nano Super Air Nozzles for Science and Industry!

A few weeks ago I was on vacation with my family. My wife and I had taken our three daughters to Columbus, OH for three days after camping in a tent for a few days. One of the focal points to the trip was COSI, the Center of Science and Industry. In case you live anywhere near Columbus, OH and have not heard of how amazing this interactive museum is, you should definitely check it out. This isn’t your normal museum.

While the Mythic Creatures exhibit and the Jim Henson exhibit were both absolutely amazing for my 9, 6 and 4 year old daughters, it was also entertaining for my wife and myself. Now you may be asking what does this interactive science place and trip with kids have to do with EXAIR.

Well, while my daughters and I were watching this enormous pendulum that knocks ball bearings off boxes every few minutes I could hear that all too familiar, gentle sound of compressed air blowing every now and then. I couldn’t however see where the noise was coming from.

COSI Pendulum

As we wandered through the different sections I saw several examples of compressed air use but none were the exact sound or display I had heard. When we were walking through the Space exhibit just above where the pendulum was located and that gentle sound was getting closer. All of a sudden I saw it. Next thing I know I look up and my 6 year old was using a joystick to control a scaled down Lunar Lander propelling it in circles. This was where the sound was coming from.

Propelled Lunar Lander

While I was amazed by this interactive piece I could tell they were using compressed air and I was curious as to how it was working. That’s when I noticed the distinct design of our Nano Super Air Nozzle on the bottom of the Lander. Here’s a close up picture, well as close as the handrail would allow me to get without over reaching.

EXAIR Model 1110SS-NPT – Nano Super Air Nozzles

The interesting part to this is how this setup gives an idea of the amount of thrust given off by a nozzle that only consumes 8.3 SCFM of compressed air when powered at 80 psig inlet pressure. These nozzles can easily be fitted to blast debris or moisture out of small pockets or hard to reach areas. They also can be used to help direct product that may be getting diverted to a new conveyor. And, obviously, they can be used to propel scale models of lunar landers. 

If you would like to discuss any application for point of use compressed air, and I do mean ANY, give us a call. If I can’t help with the application we will at the very least do our best to send you in the right direction.

Brian Farno
Application Engineer