Unique Nozzle Application Eliminates Procedure for Tobacco Processing Facility

1006ss_3up_500

I recently worked on a unique application for EXAIR’s Back Blow Nozzle. Generally, these products are used to clean out chips, debris, and coolant from the ID of pipes or tubes. With (3) different sizes available to clean out IDs ranging from ¼”-16” it’s the ideal solution for cleaning out pipes where blowing forward into the pipe won’t work. They’re also available on the end of a Safety Air Gun with extensions up to 72” long, allowing you to get to hard to reach areas.

This particular application, however, was slightly different. The customer has a large machine that rotates a large drum to dry the tobacco, much like a standard clothes dryer. Inside of this drum is a “spray boom” with an angled top designed to prevent the tobacco from settling and sticking in large quantities. At the end of this “spray boom” are Atomizing Nozzles used to apply a cleaning solution after each drying process is completed at the end of the shift.  Unfortunately, the angled design didn’t work quite as well as they’d intended.

The customer needed a solution that could periodically clean off the boom while the drying was in operation. It wasn’t reasonable to do this at the end of the drying process once the majority of material had passed through. The accumulated tobacco on the boom was perfectly usable product and anything stuck after the cleaning operation would have to be thrown out as waste. In order to clean the boom and allow the stuck tobacco to remain as usable product, we needed an automated solution.

The customer installed (4) of the 1006SS Back Blow Nozzles situated around the boom to remove any stuck-on product during the drying process. The results spoke for themselves, at 90 PSIG it removed a 14” wide radius of material from the surface. By implementing the Back Blow Nozzle they were able to reduce waste and eliminate a daily 1-hour long cleaning process to remove stuck on material from the boom.

Just because it’s an outside-the-box application for one of our products, doesn’t mean it won’t work!! With EXAIR’s Unconditional 30-Day Guarantee, you can test any of our stock products out before committing to keep them. Reach out to an Application Engineer today if you have a unique application you’d like to discuss!

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD