I’ve blogged in the past about how one of my favorite things to do is to get out of my comfort zone and over the past year, that has been a struggle for me physically. I’ve slacked off on my rucking and event participation and continued to grow my knowledge level. That’s started to weigh on me over the past few months, so I began to change it. In all honesty, I was okay with being meh. That’s not okay, and I started changing it, how you might ask? It all started with my friends and my daughters.
Rather than trying to do a 180 and completely disrupt my relaxed style, I took the approach of 5mm changes over time. That’s right, I am in the US and I just used the metric system as my primary measurement. So what does this look like, well first it started with less sitting and more standing. Even when at work, I try to stand most of the day at my desk, I’m grateful I have the means to do so through a standing desk. Then, rather than just hanging out while my kids are at their practices, I’ve taken that time to start rucking or at the very least walking/volunteering and working. These are different movements that I didn’t have over the past several months, and it’s honestly been 5mm changes and I can already feel the improvements in my sleep, and my energy throughout the day. The best part is, I can really relate this to being a great approach to an industrial compressed air system as well.
Over time a system can age, efficiencies lower, leaks start to form, equipment wears down or gets built up on it and starts to require more maintenance. Just like my personal journey, we can easily get these back on track by making small 5mm changes in our daily operations. We don’t have to completely gut and revamp a compressed air system or just throw more compressors at the system to fix it. We can follow the Six Steps to Compressed Air Optimization and work towards a renewed system.
The first point is to get a baseline, find out where you are, and then go from there. This is easily done with Digital Flowmeters w/ Wireless Capabilities. Then, rather than trying to change an entire facility, focus on one spot, one line, or even one machine. Then start to evaluate that specific point for leaks, and open blowoffs. Fixing just this one machine by reducing leaks, and replacing open blowoffs can begin to shift the efficiency within the system and drive the desire to do more. This return will also generally give the system the ability to handle expansion to other new lines as well.
Keep in mind, it doesn’t have to be a drastic change or complete teardown and rebuild. It should start with a baseline and then perform small changes from there, so the data can be collected and return can be measured to justify the means. We outline this process and do everything we can to offer items needed for each step of the process to ensure you have one single contact along the process, an EXAIR Application Engineer.
If you want to discuss further how we can help you keep ticking away at these 5mm changes within your system, please contact us.
Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF