The air gun is a quintessential tool found in a variety of settings. Machinists will use them to blow chips, debris, and coolant from parts as they’re being finished. They’re commonly used for final cleanup before an item is packaged…nobody wants to open up a brand new product and find dust, dirt, or dried-up coolant spots on it. They can make a quick job of cleaning off a work bench…if you intend to sweep the floor afterwards, that is. In fact, larger air guns can even be used to “sweep” the floor.
I recently had the pleasure of assisting a user who was going completely the other way…from the floor, that is. His company had been contracted by the new owners of a rather large show facility to “rehab” the building. Before they could do anything, though, he needed to clean years and years (and years, he said) of dust, sediment, cobwebs, and other various debris, from the open rafters overhead. All 42,000 square feet of overhead. And, because of their schedule for getting the facility ready for upcoming shows, it needed to be done quickly.
After discussing the application and comparing the capabilities of our various Safety Air Gun offerings to the available compressed air supply, I recommended, and they purchased, two Model 1360-48 Heavy Duty Safety Air Guns, fitted with Model 1106 High Force Super Air Nozzles. These made short work of a big part of the job, allowing them to move quickly on to the rest of the building restoration.
If you’ve got a cleanup job…big or small…perhaps an EXAIR Safety Air Gun is the solution. We’ve got them ranging from the Model 1408SS Precision Safety Air Gun, fitted with our 1108SS Atto Super Air Nozzle (2.5 SCFM; 2.0 ounces of force,) to the Model 1218-6 Super Blast Safety Air Gun, which uses our largest High Force Super Air Nozzle, the 1120 (460 SCFM, 23 pounds of force,) and 29 models in between. We can provide them with accessories such as Chip Shields, Stay Set Hoses, Rigid Pipe Extensions, and Compressed Air Hoses, as needed. Give me a call to find out which one is right for you.