Tag: high temp air amplifier

Air Amplifiers – Done Your Way

Published on by bdwagesLeave a comment
Photo by Ryan McGuire Licensed by Pixabay

Air Amplifiers are amazing tools that pack a punch (if the punch is a ton of air flow). Imagine an amplification rate up to 25 times. You supply 29 SCFM and yield 730 SCFM coming out? It’s incredible. These little beauties work by flowing compressed air (80psig) through the inlet to the annular chamber. It is then throttled through a small ring nozzle at a high velocity. This Airstream employs the Coanda profile directing all this air to the outlet. Although you should never blow air at a person, a little bit of air input, would easily produce the results to the right!

Why would you use these? See below for starters:

Although we have many options to choose from, sometimes you may need something outside the box. Maybe it’s a different size? A different Material? A different fitting? Ask us we do have many ways to customize this product. Here are 3 examples of things we have done in the past.

The High Temp Air Amplifier (right) was developed for moving hot air to surface needing uniform heating while in a furnace or oven. This is designed for temps up to 700°F, and is now a standard offering in 1 1/4″.

Another example of a “Special” Air Amplifier is a stainless steel version with a flange mount (left). This was designed for exhausting flue gases from a furnace. If there were a power failure, this Special Air Amplifier will quickly evacuate harmful fumes, prior to affecting the workers.

A third “Special” was made when we were brought an application that required a sticky material to be pulled through the Air Amplifier, and it was unable to stick to the inside of the Amplifier. So we developed an Adjustable Air Amplifier with e PTFE Plug (Right), so the material would not stick.

If you have an application that requires a tool that is not quite in line with what we offer, don’t hesitate to reach out. I can’t promise you that we will be able to make it for you, but I can promise you that we will look at it and give it our best shot.

Thank you for stopping by,

Brian Wages

Application Engineer EXAIR Corporation
Visit us on the Web
Follow me on Twitter

Super and Adjustable Type Air Amplifiers

Published on by Leave a comment

The EXAIR Air Amplifiers are a powerful, efficient and quiet air mover, whose power can be harnessed for blowoff, cooling and ventilation applications. Using a small amount of compressed air, air amplifiers pull in large amounts of surrounding air to produce a high volume, high velocity outlet flow.  Quiet and efficient, output flows with amplification ratios of up to 25 times are possible. There are two types, the Super Air Amplifier and the Adjustable Air Amplifier.

The Super Air Amplifier, with sizes ranging from 3/4″ to 8″, has a patented design (patent #5402938) that uses a special shim to maintain critical position of the components parts. It is through this critical gap setting that a precise amount of compressed air is passed at exact intervals controlled by the shim toward the center of the of the Super Air Amplifier.  The jets of air create a high velocity flow across the entire cross sectional area, which in turn pulls in large amounts surrounding air, resulting in the amplified outlet flow.  Because the outlet flow remains balanced and minimizes wind shear, sound levels are typically three times lower than other types of air movers. The shims are available in thicknesses of 0.003″ (supplied as standard), 0.006″ and 0.009″, and changing to a larger shim will increase the force and flow of the outlet air. The 8″ Super Air Amplifier is supplied with a 0.009″ shim, with a 0.015″ shim available.

2″ Super Air Amplifier and Patented Shim Design

For high temperature applications (up to 700°F/374°C) a special 1-1/4″ High Temperature Air Amplifier is available, with performance equal to the 1-1/4″ Super Air Amplifier. Its surfaces are protected from heat stress by a mil-spec coating process. The High Temperature Air Amplifier is highly effective at pushing large amounts of hot air to areas that typically remain cool.

The Adjustable Air Amplifier, with sizes ranging from 3/4″ to 4″, does not use a shim, and has an infinitely adjustable air gap, which regulates the air consumption and outlet flow from a light breeze to a powerful blast. A highly effective air mover, it can be tailored to meet the exact air flow and force of your specific application. They are available in aluminum and in stainless steel (Type 303) for food service, higher temperatures (400°F/204°C) and corrosive environments.

6042.jpg
2″ Adjustable Air Amplifier, in Aluminum or Stainless Steel

Force and flow of the Adjustable Air Amplifier is changed by loosening the knurled lock ring and turning the exhaust end to open or close the gap.  Once the desired force and flow is achieved, the knurled ring can be tightened to lock the device at the current setting. Typically, an air gap of 0.002″ to 0.004″ provides the required performance.

The table below summarizes the key features of the Super Air Amplifier and Adjustable Air Amplifier.  Please contact an Application Engineer if you need assistance in making a selection.

Air Amp Selection Chart

Note that EXAIR can manufacture special Air Amplifiers to your specification including special flanged mounting style or with a PTFE plug to avoid sticky material build up.

To discuss your application and how a Super or Adjustable Air Amplifier or any EXAIR Intelligent Compressed Air Product can improve your process, feel free to contact EXAIR, myself, or one of our other Application Engineers. We can help you determine the best solution!

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB