Thinking Outside of the Box

Over the years of working at EXAIR, I have spoken to thousands of customers. The applications we discuss can run the full range that is showcased in the Solutions section of our website. It is always fun to approach applications when we have to think outside of the box for a solution. Throughout the Application Engineering department, our level of experience here combined with the customer’s knowledge of their setup, sometimes results in a solution that is not straightforward. Sometimes, we have to think outside of the box.

What kind of application may we have encountered where the obvious solution wasn’t the one that worked? One of the best applications that came to mind for me is when a customer was attempting to lift/pick up a very porous piece of filter media like the pre-filter from a Heavy Duty HEPA Vac. This material is extremely lightweight and porous. When hearing from a customer, I want to pick this material up, my mind quickly goes to the E-Vac Vacuum generators which are used to generate vacuum to operate suction cups.

In-Line E Vac picking up a block of cut extrusion.

With this material however, the vacuum flow needed is quite extensive and there is another product which is going to be a more efficient use of compressed air. That product, the Super Air Amplifier. As you can see in the photo below, a 2″ Super Air Amplifier easily lifts the porous material and because the suction side is a nominal hose size a hose can easily be attached if needed. The image shows a single amplifier lifting a larger sheet from a bench, these could be organized in an array like suction cups to pick materials up.

Model 120022 – 2″ Super Air Amplifier picking up a porous pre-filter material.

The moral of the story is to keep an open mind for solutions, while one path will always work other paths may become a more efficient manner. These solutions don’t always fit inside a box nice and neat. The Super Air Amplifier fit this because the amount of air entrained is tremendous and can easily be utilized to pull low vacuum force/high flow applications. This is very similar to fume evacuation which would be a “normal” application for the Super Air Amplifier.

If you want to discuss any point of use compressed air application with us, contact an Application Engineer and let us help you determine the solution your job needs.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF